Oil & water don't mix …

M

 

Johnny, I would use a water based poly, such as Target's EM9300. An alternative would be to apply a super blonde shellac and put the oil based poly. Make a sample board because the oil will darken the finish somewhat. Finally, you might try using the oil over the dye without the shellac, but, again, make a test board. FWIW

 

Can I apply the oil based poly on top of the water based stain?

Absolutely, as long as the stain is completely dry, you will have no issues. I use water base stain under oil base finishes all of the time with out problems.

 

Just remember the oil base will change the color tone of the pink, more so then most water based polys.

 

No, my choice would be Target 9300 to prevent color change. Transtint dye can be added to the 9300 as a tint. Yes, oil over water works fine, but no OB finish is water clear.

 

Check the color effect of the poly over water based stain to be sure its still what you want, but you can safely use poly over water based dyes. I've done it in most of the furniture I have built and have never had a problem.

 

I've used oil based product over water based stain hundreds of times. Just wait the appropriate time, recommended by the stain company, and go for it.

That aside, have you looked into dye? It's MUCH more pink, if you want that.

 

You will be fine, but the advice above (dyes, the color shift, etc.) is spot on. You might want to reconsider the oil just because of the color.