The current production models do not get very good reviews. To be totally honest with you, you can pick up already cleaned or even restored vintage tools for less than those new tools. Also, an adjustable mouth for a jack is totally unnecessary, and I would say it's not really necessary on a smoother either. Additionally, I would just start with a single low angle block plane, a standard angle one doesn't add much to the party. I bought dirty vintage and restored them, but guys like DonW, Josh (hyperkitten), Patrick Leach, etc. sell tools ready to use for reasonable prices.

 

Totally agree with Brian.

 

If you want to go on the cheap by some vintage to restore for sure. If you don't feel like screwing with that there's nothing wrong with the new sweatheart stuff. I've got the new No 4, a shoulder plane and a block plane. Once you get them sharp they work fine. I like my new No 4 SW better than either of the old No 4 baileys I've fixed up for certain things.

 

Thanks for the advice. I'll try to get a hold of Don and see if he can hook me up with some quality users that are pretty much ready to go +/- sharpening the irons. I'm all for saving coins and have done several gun, knife, axe, and tool restorations with good results. While I enjoy the process I'm kind of looking to get into a set of basics ready to go and after that I'll build the collection one by one as I pick them up.

I appreciate the leads to good places to pick up some tools. I'm new to this forum and haven't found my way around yet. I've done a ton of work in my grandfather's shop but it's centered around power tools and I'd like to explore the use of hand tools and more traditional jointery for now with my own shop in several areas. I don't know if I'm ready yet to give up the table saw or router as those are just crazy handy to have.

 

If you want new, then look at Woodriver, Lie-Nielsen, or Lee Valley's Veritas line of planes. If you don't want to pay that much, buy vintage pre-WWII and restore them.

 

E-bay is another source, some great deals but time consuming, A 60 1/2 low angle should be your first plane and go from there, I actually picked up L.N. 102 which is the plane I reach for most of the time. Depends on what your needs are but for touching up 3/4" long or end grain I wouldn't look at anything bigger yet.

 

If You live in Europe this is great set: https://www.dictum.com/en/tools/woodworking-metalworking/planes/dick-planes/703427/dick-plane-set-for-beginners-right-handed-use?ffRefKey=64N6tjk8L