A sheet of plywood on sawhorses is a temporary solution at best. You have to start somewhere so build your own sawhorses there are a zillion plans you can find online for that. Here is one
Sawhorses are very useful and every wood worker should know how to build a pair. It would be quite easy to screw the plywood to the sawhorses for stability. 3/4" plywood is minimum thickness for a work bench, a double layer would be better.

 

For the sawhorses, buy some brackets like this (or there are lots of other types out there) and use cheap wood to complete them. Or, to go even cheaper, google sawhorse plans and build some completely out of wood. Here is one example. Plus, this is a good beginner project to get some experience.

 

You could just build the sawhorses out of some scrap 2X4, lay the plywood on them and either put some screws in each corner into the sawhorses, or use a clamp to clamp each corner. Another way to do this that makes a good workbench is to put an old solid core door on a couple of saw horses. Its much thicker than plywood and wont sag. You can find old doors that are cheep at recycling centers like Habitat for Humaniity ReStores.

 

You can make your own.
http://shoppingmatchmaker.com/sawhorse.html

If you have a problem just screw through the plywood into the horses.

 

You might even want to consider the folding sawhorses. I have two Sawhorse brand that have been great.
They re light and strong. Sure are easy to store. http://www.acehardware.com/product/index.jsp?productId=12322183&cp=1259459
See the link.
Bll

 

My primary work bench is a couple saw horses I made with the brackets sold in HD and a piece of 4×4 MDF. It's as solid as anything I've worked on.
There isn't a set of horses you can buy that would be good for a workbench though. You have to make it yourself.

 

I used those yellow, heavy guage folding steel saw horses from HD and a double thickness of 3/4" plywood for a top, before I built my bench.
In fact, I built my bench, upside down, right on top of those very saw horses.
Since they are steel, you have to attach a 2×4 across the top to avoid wrecking your saw blades when sawing on top of the saw horses; screw holes are provided for that.

I don't think any of the plastic ones would be strong enough.
OR, as everyone else has suggested you could make your own; tons of plans available.

I made some custom ones of my own even though I still have the steel store bought ones.
You always need a portable place to work on outside projects. At least I do. YMMV

 

Saw horses are great but you are probably better off getting some 2×4 and making a simple frame with 2×4 legs and then put the same piece of ply on top of that. It would be stable and at a more appropriate height.
Good luck!

 

I haven't seen anyone else talk about them, so I'll chime in.

I have four of the folding sheet metal sawhorses sold in hardware as well as the big box stores. I think they work great. They are light weight and fairly sturdy when set up.

I have had them for about 15 years now. They are covered in paint and lacquer and glue and still going strong. I take care when folding them up so the legs are not bent. A little care, like with any other tool, and they will last forever.

I screw a length of 2×6 to the top of each saw horse. When the 2×6 gets all cut up, I unscrew it, flip it over, and screw it back on.

If I need a work surface, I will lay a piece of 3/4" plywood or an old slab door. If it it light work, it's an old hollow core door. If it needs to be more solid, I have an old solid core door.

Cheers!

 

Hollow core door works good for an assembly and layout
table. You cannot pound on it but the torsion box-like
construction makes them stay flatter than plywood.
MDF or melamine will stay flatter, but of coarse these
are very heavy sheets and if left outdoors the edges
get wet the thing swells and gets ruined eventually
as a work surface.

In terms of support you can get 2 of those yellow folding
steel sawhorses and tie them together with a couple
of straight 2×4s and lay your door on top of that.

I have both the steel and the folding plastic ones and
I think the plastic ones are easier to use. The steel
ones have individually adjustable legs. On uneven surfaces
the steel ones will twist when you put weight on them -
it's not a bad thing and its a factor in the way they are
made that comes in handy sometimes, but be aware of it.

 

I think the folding steel horses are a bit shorter than the wooden kit ones (I may be incorrect). The wooden ones are a great height for a bench. I would run a 2X4 stringer on each end of the saw horse top to connect the two horses at the length you want. Put a couple of more 2X4s in the frame cross wise and put your top of choice on. You could even put some supports and a lower storage shelf on the whole affair.

 

Build your first workbench. You do not need an interim saw horse bench. Buy some 2×4s, a solid core door and find a free plan at fine woodworking or any of the other mags. If you want to woodwork then woodwork…
Don

 

Once you have your sawhorses built you might want to check the Rockler sawhorse brackets to secure your top.

http://www.rockler.com/product.cfm?page=25430

Good luck.

 

I'll cast another vote for build them yourself.

A pair built like this shouldn't cost more than $20 in 2×4s, put some 3/4" exterior plywood over the top and you're set.They can be made very quickly if 10 8' 2×4s are cut in half and 2 of those halves are cut in half again and then assambled without the top surface extending past the legs.

If you insist on buying a pair, I will recommend Trojan Tools sawhorses as they are simple. strong, and versatile, being that you can make them up with any length or width of 2x material

Yes, I know this sawhorse looks rough,it's the only one I have around that I can get a clear picture of, it has been sitting outside uncovered for many years and was thrown together in about 10 minutes, to hold a bunch of 12" x 12" x 12' timbers off the ground and has been abused ever since. With a little time and effort these sawhorses can be made to both look and function well.

There are some simple to build folding ones around as well, If your interested.

 

"Build your first workbench. You do not need an interim saw horse bench. Buy some 2×4s, a solid core door and find a free plan at fine woodworking or any of the other mags. If you want to woodwork then woodwork…
Don"

This is the kind of high-handed response that really irritates me. Who are you to say what the OP needs or doesn't need? Giving an opinion is one thing, but to provide a smartass statement like "If you want to woodwork then woodwork…" is far from helpful, especially to a new member who may or may not have the skills, equipment, or desire to build their first workbench right this moment.

OP, I would suggest that you do indeed look into building your own sawhorses if that's the route you want to go. Using a full sheet of 4×8 plywood might be a bit unwieldy. You might consider having a sheet cut down to 2×8 and doubling it up for added ridgidity. If eight feet is too long for your space, you could also cut it down lengthwsie to something more manageable (say five or six feet). The HD store should be able to do that for you.

 

High-handed? I don't think so. Just my opinion. My very first project was building my workbench, I didn't even have a tablesaw yet but knew I was interested in woodworking.
OP, I would suggest that you do indeed look into building your own workbench. It won't cost you much and I'm fairly certain you'll enjoy it more. I'm still using my first workbench (2×4's and solid core door) and have added to it as time went on. Look at my bench in "workbench slapdown". The bench doesn't need to be fancy, just functional.
Again, I repeat, if you want to woodwork then woodwork. A workbench is the perfect opening project.
Don

 

No doubt, a workbench is an essential shop tool for most woodworkers and can be a great project to learn on. That's not what the OP was asking about, but it's good input nonetheless.

 

Here is a Sturdy but Simple Sawhorse with step by step video from one of the LumberJocks.

lumberjocks.com/Stevinmarin/blog/29700

Props to Steve.

Work Safely and have Fun. - Len

 

Why does a saw horse bench need to be interim? And who says the poster even wants to be a 'woodworker?' If you look at ctychicks first post she talks about wanting to do some furniture refinishing, so maybe a work surface that can be knocked down and stored against a wall is what she needs - and more importantly, wants.

 

As much as I like my sawhorses (that I built from scratch), If all I needed were an "elevated work surface"-I'd probably skip building anything and just stop by a garage sale or second hand store and buy a table. The only real advantages in using sawhorses for a worktable are (1) they take up less space than a table, (2) they're portable, and (3) unlike a workbench or work table, you don't have to worry so much about marring them up with your saw blade.

 

OP here…

Thanks for all your replies. I'm definitely going to build my sawhorse and will likely use the instructions in Steve's video. I guess I have to go out and buy a compound mitre saw now, LOL! I was really hoping to put that purchase off for a while (budget and all that!) but maybe now is the time. I'm assuming there isn't any way around this??

 

You don't necessarily need a saw like that to cut miters. A hand-held circular saw also works.
Here's the sawhorse design I use (see link), which can be built with a circular saw-and a few less angles to cut than what you see in Steve's video.

http://www.ezwoodshop.com/sawhorse-plans.html

 

Andy - I don't think I'm ready for a circular saw. I'm generally pretty bold, but there's something about that thing that scares me. Maybe it's because I have two little kids who have had their share of ER visits?? My neighbor is an EMT and just today I ran into her at the hardware store. I told her some of my DIY plans and she cringed when I told her that the circular saw was on my list. I think I want to master my jigsaw first.

 

Circular saws are one of those tools that have the "scary" factor-I've had a couple of nasty kickbacks that thankfully didn't result in injury, but scared the poo out of me. I took the time to learn to use the saw correctly and now I find it to be a great tool, but one that must be used with respect.

You could certainly use your jigsaw with a straightedge to cut down 2x lumber and sheet goods. It'll just go a little slower than with a circ saw or miter saw. Good luck!

 

If you are serious when you ask 'is there a way around this?', then yes - just buy the brackets. Nothing but straight cuts there. Compound joinery is not easy. Not hard but not easy. When it comes to spinning blades don't do anything you are uncomfortable with. It's no fun anymore if you go in the deep end too fast.