Jim, I have almost unused AP10 and have managed to locate spares and a manual. I have never turned it on thinking I should clean out old grease and check the belt etc. . I'd really appreciate your instructions. Sending you an email. Thank you. -Jack

 

Jim, I have an AP10 as well. My drive belt just broke and I am getting ready to dig into the project. I would love a copy of the procedure if you don't mind!

 

Jim, just blew the belt drive on my 10 Ryobi,...I ordered new drive belt and a set of new blades…can you help me out with how to change the belt drive?
Thanks,
Jeff

 

Jeffrey Jacob, would be happy to sent it to you, it also includes a copy of the manual. PLEASE SEND THE REQUEST DIRECT TO ME as an email jimkhenderson@comcast.net …will send you the Acrobat PDF file.

 

Jim,

Please send me the AP 10 belt replacement instructions.

Thanks,
Dan

 

Jim,
DAN21…....would be happy to sent it to you, it also includes a copy of the manual. PLEASE SEND THE REQUEST DIRECT TO ME as an email jimkhenderson@comcast.net …will send you the Acrobat PDF file.

Jim

Please send me the AP 10 belt replacement instructions.

Thanks,
Dan

- dan21

 

Sent email

 

Bondo Gaposis it is on its way!

 

Just sent you and email

frankiebeckman@msn.com

 

Hoss1947, thank you for the offer to send the pdf if needed. My husband definitely needs the pdf. I have sent you an email separately.

kind regards!

 

Just an update, since I posted this I have responded to over 200 request from around the world - Korea, South Africa, England, Chile etc.

Hope it has helped.

Still available, just email me per original post.

 

I had to figure this out the hard way.

 

Well 2017 update, I have now sent to about 300 people world wide. Big increase in requests in the past 6 or 7 months.

Still available just email me at:

jimkhenderson@comcast.com

 

I know this post is a few years old, I tried emailing hoss and the email is no good. Does anybody have these instructions for changing the belt or can explain it to me. I have the machine apart and the belt off. Is there anything special that needs to be done?

 

I know this post is a few years old, I tried emailing hoss and the email is no good. Does anybody have these instructions for changing the belt or can explain it to me. I have the machine apart and the belt off. Is there anything special that needs to be done?

- DaMuffinMan

Well 2017 update, I have now sent to about 300 people world wide. Big increase in requests in the past 6 or 7 months.

Still available just email me at:

jimkhenderson@comcast.net (note.net not .com)

- hoss1947

Well 2017 update, I have now sent to about 300 people world wide. Big increase in requests in the past 6 or 7 months.

Still available just email me at:

jimkhenderson@comcast.com

- hoss1947

 

Hoss1947

I emailed you a couple of days ago, wondering if you still have the pdf and if you had an idea of where to get a new belt from.

Thanks

 

Here is where I bought mine just a couple of months ago. https://www.amazon.com/gp/product/B000P8SM5C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 Easy to put in also. Here is the manual. https://www.sawdustzone.org/forum/discussions/getting-started/832884-ryobi-ap-10-surface-planer

 

I emailed, too, but haven't heard anything. Is this info still available?

 

See my last post. abpve