LumberJocks Woodworking Forum banner

Delete project

1.5K views 10 replies 9 participants last post by  John Smith_inFL  
#1 · (Edited by Moderator)
I need to delete a project, how do I do that?
 
#2 ·
You can go in and click the "edit" button and then delete all the text and remove all the pictures. But I don't think you can actually delete the whole project. Send Cricket (site admin) a message if you need it completely removed. She is the only one that may be able to do it for you.
 
#5 ·
I usually just smash it with a hammer and throw it in the fire.

- SMP

If it s big, you can do pretty well with a truck, just back over it a few times, even DTs give up after about the third pass. Saves a lot of wear and tear on the arm. :)

- therealSteveN
good tips guys-lol. but kenny has the correct answer he was looking for.
 
#6 · (Edited by Moderator)
that is correct: you can not delete a project from the forum.
but - you can delete the contents and leave a note of why.
and you can not delete any of the posts that are on the thread.
I see you only have one project posted. and I see nothing wrong with it.
so - my personal suggestion is just to leave it alone and let it ride.
 
#10 ·
Click to report the project.

- Cricket
I can't find a "report" option anywhere on the project. It won't let me delete all the pictures either, requires at least one. Worst case I'll just replace it with something else.

I must admit that as soon as I saw this post I went straight to the project. Curious, why delete it?

- controlfreak
Personal. Not something I want to get into.