With these big glue ups and finishing projects do you still get a little frantic while doing it? Or you have done it so many times you can do it in your sleep?

- corelz125

I've done it so many times, it's just routine. There's never really any curve balls, so nothing to get excited about other than deadlines.

When I ran my Commercial shop, we mainly built the merchandising displays and the exterior store fronts and cash counters.
We did stores all over the place (Texas, Florida, Georgia, Arizona, Cal.,) Also did a lot here in Vegas, Malls and Casinos. We would build them here load the trucks and travel.
There were big penalties if you did not have their stores ready to stock when you were supposed to.
Every place was different,
Dealing with General Contractors, Codes, Inspectors, Unions, Property Access, etc.etc…
I think there were plenty of times you could say I got a little frantic, but always persevered…

That said, this is a cakewalk.

 

With these big glue ups and finishing projects do you still get a little frantic while doing it? Or you have done it so many times you can do it in your sleep?

- corelz125

I ve done it so many times, it s just routine. There s never really any curve balls, so nothing to get excited about other than deadlines.

When I ran my Commercial shop, we mainly built the merchandising displays and the exterior store fronts and cash counters.
We did stores all over the place (Texas, Florida, Georgia, Arizona, Cal.,) Also did a lot here in Vegas, Malls and Casinos. We would build them here load the trucks and travel.
There were big penalties if you did not have their stores ready to stock when you were supposed to.
Every place was different,
Dealing with General Contractors, Codes, Inspectors, Unions, Property Access, etc.etc…
I think there were plenty of times you could say I got a little frantic, but always persevered…

That said, this is a cakewalk.

- LeeRoyMan

thats why your the pro and were wood weenies ;-))

 

thats why your the pro and were wood weenies ;-))

- pottz

I'm still a wood weenie…..

 

LeeRoy - are you n Vegas? Left there almost 4yrs ago. What area are you at?

 

LeeRoy - are you n Vegas? Left there almost 4yrs ago. What area are you at?

- Hammerthumb

I'm out at the speedway now.
I remember when you were here. Asked you once if you knew Mark Snodgrass? Being in the flooring business.
I've done a lot of work for him. I've bought a lot of material at Virginia Hardwoods.
Any of that ring a bell?

 

Messed up a little. Long story short I ended up with the right side opening 1/8 to small for the glass shelves.
Bringing the glass back to the shop and going to run them through the jointer a few times to shorten them up.

 

GREAT JOB MASTER :<)))))))

 

Messed up a little. Long story short I ended up with the right side opening 1/8 to small for the glass shelves.
Bringing the glass back to the shop and going to run them through the jointer a few times to shorten them up.

- LeeRoyMan

ok ! let us know how that works out.

 

Video it. Start doing livestreams. Sell LeeRoyMan gear. I'd buy a tshirt if it looked good.

 

Video it. Start doing livestreams. Sell LeeRoyMan gear. I d buy a tshirt if it looked good.

- 1thumb

dude your avatar is damn creepy.what is that ? and im good for a shirt too buddy.

 

Looks good from here. So you have a little fine tuning to do. Built iff site, that's still good.

 

Looks good from here. So you have a little fine tuning to do. Built iff site, that s still good.

- Eric

i thought he was a pro buddy,ive lost all faith now ;-(( i hope he can save the glass on the jointer ?

 

It's still a professional job, in my opinion. I need some jobes like that.

 

i thought he was a pro buddy,ive lost all faith now ;-(( i hope he can save the glass on the jointer ?

- pottz

I keep saying I'm just a cabinet hack!
Monday I'll change out the jointer blades and put in the glass chippers. Should be just fine.

Thanks GR8HUNTER!!

 

i thought he was a pro buddy,ive lost all faith now ;-(( i hope he can save the glass on the jointer ?

- pottz

I keep saying I m just a cabinet hack!
Monday I ll change out the jointer blades and put in the glass chippers. Should be just fine.

Thanks GR8HUNTER!!

- LeeRoyMan

you crack me up man.

 

dude your avatar is damn creepy.what is that ? and im good for a shirt too buddy.

- pottz

Would be a cool shirt. LeeRoyMan in bold print. Beneath it in smaller print, 'They call me Master' The back could be a darkened silhouette of Leeroyman's head, hair all frazzled after a tough day of sweating for bucks thru woodworking. Sell like hotcakes. Great brand name.

My avatar is AI generated. You answer an exhausting amount of questions and surveys pertaining to your life experiences, opinions and current viewpoints. Based on your personality and responses an avatar is created and designed as a honest depiction of yourself. You want to come over, Pottzie?

 

dude your avatar is damn creepy.what is that ? and im good for a shirt too buddy.

- pottz

Would be a cool shirt. LeeRoyMan in bold print. Beneath it in smaller print, They call me Master The back could be a darkened silhouette of Leeroyman s head, hair all frazzled after a tough day of sweating for bucks thru woodworking. Sell like hotcakes. Great brand name.

My avatar is AI generated. You answer an exhausting amount of questions and surveys pertaining to your life experiences, opinions and current viewpoints. Based on your personality and responses an avatar is created and designed as a honest depiction of yourself. You want to come over, Pottzie?

- 1thumb

lol-let me check my schedule and ill get back to ya !

 

1/8" to small i call that good. just hit it with the rubber mallet

 

1/8" to small i call that good. just hit it with the rubber mallet

- corelz125

buddy once he runs that glass through the jointer he'll be fine.listen and learn ?

 

1/8" to small i call that good. just hit it with the rubber mallet

- corelz125

Maybe a sledge hammer…

 

1/8" to small i call that good. just hit it with the rubber mallet

- corelz125

Maybe a sledge hammer…

- LeeRoyMan

Now you got the idea if the first hammer doesn't work just get a bigger one.
Always better to have extra then be short.

 

You can run glass through a jointer?

Looks good from here.

 

You can run glass through a jointer?

Looks good from here.

- Peteybadboy

remember leeroy is a pro,dont try that at home !

 

You can run glass through a jointer?

Looks good from here.

- Peteybadboy

If you wear enough safety equipment and don't care if you break the glass. :>O
(Or….. a glass polishing machine works even better)

 

You can run glass through a jointer?

- Peteybadboy

Honestly, you'd have to be a moron to try something like that. Any idiot knows you do that on a table saw!

DUH