yrob's Blog

  • Advertise with us
This blog is written by yrob | 3 entries so far

Latest Entry

restored craftsman 12" bandsaw

11-17-2012 11:03 PM by yrob | 3 comments »

Recently a friend gave me a bandsaw that was part of a barn he had emptied.(he buys lots and auction them). its an old 12” crafstman. it had rotten tires, seized bearings and worn out blade guides.i installed a wood slicer timber wolf blade. i had to take off the wheels and clean the axles then balance the lower wheel and realign everything shimming the lower wheel to line it up with upper wheel. after all that was done i adjusted the tracking and squared the table to the blade. almost no vibrations, most of the vibrations are probably the belt and the poor metal stand. i will probably make a heavy wood stand for it. i have to install a kreg fence tomorrow to try re...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics