woodklutz's Forum Topics

  • Advertise with us
View woodklutz's:homeworkshopprojects (0)blog (23)reviews (4)forum topics (10)buddies (2)favorites (48)activity logWatch
08-05-2013 08:50 PM

Mathematically challenged - 4 replies

I am trying to make a cutting board from 30degree cuts. Problem is this. Blanks measure 1 5/8 wide. I set my 30deg stop 1 5/8 from cut each successive cut follows with no deviation,1 side comes out 1/4 wider even though all is set true. What am I doing wrong? Sorry for the description being so fuzzy.I am winding up with a rhomboid which I don&...

07-03-2013 12:52 PM

Grr-ipper - 16 replies

Gr ripper is highly touted as the ultimate safety device to use on a table saw. Aside from SawStop. I would like to know if any LJ’s have had a slipping problem? All that I read is that it is great but a little expensive. I did read the blog about a kick back incident but nothing more. There is nothing more important than shop safety and r...

04-15-2013 12:05 PM

The art of our craft. Look ma no power tools. - 2 replies

01-10-2013 02:14 PM

refinishing plane tote - 13 replies

What do you recommend for refinishing the tote, removing old paint or stain? Then what finish to put on?Thanks

12-26-2012 03:07 PM

wipe on poly mix - 10 replies

What kind of container is best to store batches of mixture 50/50 so that it keeps. Thanks to all and Happy HolidayPeace to All with Kind Thoughts

09-16-2012 08:52 PM

band saw blade/fence problem - 7 replies

A puzzle, after years of sawing straight against my fence the new blade started wandering. I rechecked all my settings. I adjusted my fence and I achieved the straight cut, but not without a major angle on the fence. This is new to me and I was wondering if any body else has had a similar problem. The tension is tight 1/4 play. It was fine pri...

07-21-2012 06:56 PM

Pandoras Box - 9 replies

It was suggested that I post here to get more eyes on the subject. I am sorry for the redundency. The box I refer to is Pandora’s, when opened as “off topic” it releases all the ills that permeate this once fine site. By nature we are all curious, so we open the forum and are subjected to non wood related BS and name calling.I have noticed ma...

04-13-2012 07:00 PM

Blocking BS bloggers - 5 replies

How can I block a poster? Wood talk OK, politics not OK. It will be a small list i am sure.

11-30-2011 10:50 PM

Hand Saws trade or sell. - 0 replies

Have 3 Disston Saws 1 Fila. In good condition, I know zip about hand saws. Offer anything, shipping cost are an unknown at this time. Pix stink sorry. No rust, 1st pix is Fila, etching is visable, All the blades are in good condition.Etching also on Disstons. Again shipping should be considered not the weight I guess but the dimensions. htt...

01-29-2011 03:50 PM

Help, I need a part. - 2 replies

Hey LJ’s, who else could I turn to for this request. I have an old Master Mechanic Router model MM 8510 that has a missing collet. This is a 1 3/4 hp router that I have had for at least 20 years, but it worked and money is tight so if I am able to I would like to fix it. I called True Value who was the seller of MM but no help. I am sure t...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics