LumberJocks

wingless's Blog

  • Advertise with us
This blog is written by wingless | 1 entry so far

Latest Entry

wingless' Ridgid R4511 Granite Table Saw - Bevel Mechanism Gear Skipping Repair

02-09-2019 01:05 AM by wingless | 4 comments »

There are several Internet topics about Ridgid R4511 granite table saw owners w/ tilt bevel mechanism rack and pinion gear skipping problems, but I have not located any with the solution to that problem. That problem existed on my terrific new-to-me R4511 table saw. There was no solution provided when I called Ridgid technical support. (When I determined the solution, I called them back so they would also have that information.) On my saw, when attempting to set a 45° bevel, just prior to reaching that angle the pinion gear would skip one tooth on the rack gear, with a loud clunk. The entire saw was cleaned and all the moving contact surfaces were lubricated, but all that had...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com