Yuri's Blog

  • Advertise with us
This blog is written by Yuri | 10 entries so far

Latest Entry

Four layers ball #3: Making first hole

08-26-2012 12:22 AM by Yuri | 5 comments »

I’ve got everything i need to make a first hole. I used some video here, advertisings are not mine, they are part of – video hosting web site, sorry… I have some liquid grip leftover, so I used it on the chuck instead of double side tape.!!Aligning the radius turning jig.Setting the other axis .!!Visual inspection.Measuring the depth bit has to dive in..!!Making first hole..Hole made on the end grain side of the ball.Close look.Two holes.I did not do any sanding or cleaning, the cuts you see are straight from the bit..Drilling holes takes less time then to setup ball in the chuck :)

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics