LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Dick, & Barb Cain's profile

Building a Deck from my SketchUp plan! #4: The Grand Finale!

06-28-2008 11:11 PM by Dick, & Barb Cain | 24 comments »

Well folks! It’s finally done! This took a little longer than expected, because of the weather, & things. It’s amazing that it looks just like the SketchUp plan, but I think a tad better looking though. My Son, & his family really love it. It’s almost like...

Watch this video »

View Skip's profile

Jig for mating two curved surfaces for gluing (Part deaux)

06-21-2008 08:31 PM by Skip | 5 comments »

I have re-created the episode on building a jig to mate two curved surfaces for gluing. I hope this is much better.

Watch this video »

View teenagewoodworker's profile

Simple Square Inlay

06-20-2008 12:55 AM by teenagewoodworker | 11 comments »

Hey Everyone, In this episode of the Teen Age Woodworker i will show how i made the square ebony inlay in my hickory picture frames. ! I found this to be an inlay that i was intimidated with in the beginning but turned out to be a really simple inlay to do that anyone can do with a dri...

Watch this video »

View Al Navas's profile

Krenov-inspired cabinet #3: Overlapping rabbets to fit the doors

06-18-2008 09:28 PM by Al Navas | 5 comments »

From my blog: In this episode I show how overlapping rabbets provide one solution to fitting the doors to the cabinet, while minimizing the door gap. I used a small shoulder plane to clean up the rabbet surfaces, to improve the fit and allow the doors to close with a nice, tight fit. Credit...

Watch this video »

View Al Navas's profile

Krenov-inspired cabinet #2: Knife hinges

06-16-2008 02:03 PM by Al Navas | 3 comments »

For the hand tool users: If you have any suggestions on how I could improve my chisel technique to chop the mortises, please let me know ;-) – THANKS! From my blog post: In this episode I show how I did the layout and chopped the mortises for the knife hinges in the doors, and in the ...

Watch this video »

View Skip's profile

Insetting an inlay on a dining table

06-13-2008 07:58 PM by Skip | 15 comments »

Please don’t be too critical on this one. This was my first video and also my first attempt to inset an inlay. I had a lot of hours in this table and was very nervous. You may ask, “Why the inlay”. I just wanted an accent. - – Skip – -

Watch this video »

View Skip's profile

Jig for mating two curved surfaces

06-13-2008 07:53 PM by Skip | 7 comments »

I built this jig, so I could mate two curved surfaces and have a clean glue joint. I used it on a dining table. I will post pictures of the table shortly. —Skip—

Watch this video »

View Skip's profile

Sharpening a cabinet scraper

06-13-2008 07:23 PM by Skip | 18 comments »

Someone asked me to post this video on this site, so here we go. It is my idea of how to sharpen a cabinet scraper. If I am all wet, please let me know.

Watch this video »

View gene's profile

Need Help on Editing software for Video

06-13-2008 07:00 PM by gene | 10 comments »

Hi! Everyone,I am trying to convert a video that I have shot on my video camera for uploading to the site. My question is, What is the best program to purchase in order to get my video to load as a complete video instead of breaking it down into short segments? I know that the videos I see everyo...

Watch this video »

View Dick, & Barb Cain's profile

Building a Deck from my SketchUp plan! #3: Deck in constuction stage!

06-11-2008 01:05 AM by Dick, & Barb Cain | 16 comments »

Well, we got the permit, & finally started building it. The demolishing of the old porch didn’t take too long, because it was so poorly constructed, it was hanging by a thread. They poured the slab over some clay in between the foundation walls, The clay had settled over time...

Watch this video »

« prev 1 ... 554 555 556 557 558 559 560 ... 575 next »
5747 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com