LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View LastingBuild's profile

Treadle Lathe #12: Headstock

02-09-2019 03:16 PM by LastingBuild | 1 comment »

The headstock went through several design changes prior to the build. I originally planned to mount the spindle drive wheel (3’ pulley) between the first two posts. I realized the stock was not going to be long enough for the spindle height I wanted. I settled on laminating 6×6 o...

Watch this video »

View JimDaddyO's profile

Shop stuff #148: Snow thrower auger belt change

02-08-2019 06:53 PM by JimDaddyO | 3 comments »

Ahh yes, winter. Not like they used to be, but we still get enough snow that an old fart like me has to keep a snow thrower around. With anything mechanical, of course, there will be fixing to do. After burning out the belt doing some heavy wet snow I decided I would show how it is changed. S...

Watch this video »

View Matt Snyder's profile

Router Table Upgrade

02-04-2019 11:54 AM by Matt Snyder | 3 comments »

When I built my workbench I made a folding table, hinged to my workbench wall, that I envisioned holding my fancy Bosch router table. In practice it felt awkward with the table so high and it also blocked the cabinet behind it. Time for a new plan. I took the mounting plate off the ...

Watch this video »

View Matt Snyder's profile

The Box-From-A-Block Jig

02-04-2019 07:16 AM by Matt Snyder | 6 comments »

This is a jig I made that allows me to make a small box from any size block of wood (within reason). The appropriately sized frame pieces mount to the walnut sliders and the whole jig mounts to my router table. I was able to route out 13 blocks in less than 20 minutes. I decided to...

Watch this video »

View BenhamDesign's profile

Building a Reception Desk for a Local Art Gallery

02-03-2019 06:59 PM by BenhamDesign | 2 comments »

One of my favorite projects I built for a local art gallery here in Colorado. The top of the reception desk and outer wrap is made from solid cherry, and the cabinets are Cherry faced plywood. The hardware I used is Blum tandem soft close drawer glides, and the light kit is one of those flexibl...

Watch this video »

View A Slice of Wood Workshop's profile

Easy to Make I-Beam Sawhorse

02-03-2019 05:36 PM by A Slice of Wood Workshop | 0 comments »

These sawhorses are what I believe to be the easiest and strongest to build (ok, maybe not the easiest). Check ok the build and make a set for yourself today, you won’t regret it. Don't forget to subscribe and hit that thumbs up please! View on YouTube

Watch this video »

View JimDaddyO's profile

Shop stuff #147: Cleaning and tuning a contractors style table saw

02-02-2019 02:09 AM by JimDaddyO | 1 comment »

I helped one of my neighbours pick up a table saw from his In laws. It was in need of cleaning and tuning up, so I did it for him and ran the camera while doing it. I explain what I am doing as I go through the machine and bring it from trashy to treasure. View on YouTube

Watch this video »

View Hoosierwoodcraft's profile

Historic Woodworker Videos #41: The Adventures of Lemuel Chenoweth to create timber-framed covered bridges

02-01-2019 05:06 AM by Hoosierwoodcraft | 4 comments »

The last few months I have been researching the science and techniques to create a timber-framed covered bridge using the techniques of the 19th century. If you are curious about how woodworkers built a wooden bridge in the 1840s, click on the link below. https://youtu.be/62RJfNKFXZE

Watch this video »

View LastingBuild's profile

Treadle Lathe #11: The Frame and Flywheel are complete and installed

02-01-2019 12:23 AM by LastingBuild | 0 comments »

Over the past week, I took apart the frame and did final shaping. I tapered the legs some to give the base a more bulky appearance. This also shifts some of the weight to the base. I added the bearings to leg #1 and #2. I draw bored each leg to its corresponding base. Each leg was label...

Watch this video »

View Logboy's profile

How To Keep A Live Edge Slab From Warping

01-31-2019 07:25 AM by Logboy | 8 comments »

A question I get hit with a lot is how to keep a live edge slab from warping, or how to stop one after it has started warping. I decided to make a video explaining the wood science behind it and what you have to do. https://www.youtube.com/watch?v=YrwD6qHK5IM&feature=youtu.be Heres ...

Watch this video »

« prev 1 2 3 4 5 6 7 ... 565 next »
5650 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com