LJTV: LumberJocks Woodworking Videos

This is the list of all blog entries tagged with 'video'.

Hand Plane Restoration #1: Stanley Bench Plane

10-15-2007 10:24 PM by | 74 comments »

STANLEY BENCH PLANE RESTORATION Click here for large format version PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET More information available on my woodworking blog & podcast The Folding Rule Show Step #1 – Cleaning & Rust Removal I have been inspired by a number of ...

Woodworking Brain Teaser

08-16-2012 10:18 PM by | 10 comments »

Here is a quick and fun Project, A Brain Teaser.. This is the first video of the new Weekly videos I will be posting Every Wednesday!!

Furniture Design #1: Fibonacci gauge

08-05-2007 02:00 AM by | 33 comments »

1 • 1 • 2 • 3 • 5 • 8 • 13 • 21 • 34 – The Fibonacci Sequence I have been fascinated with The Fibonacci Sequence and The Golden Rectangle for some time. I finally got around to building a Fibonacci Gauge that was featured in WOOD Magazine. The guage maintains a consatnt propor...

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #7: Part 7 - Sharpening an Auger Bit

10-03-2011 12:08 AM by | 36 comments »

I know I said that sharpening an auger bit would be part 8 of this blog series, but I’ve taken the liberty of bringing it forward since the ‘Using a Hand Brace’ part isn’t finished yet. After spending precious time restoring a hand brace, you will soon realize that it isn’...

How I Make a Lazy Susan

10-01-2008 05:36 PM by | 33 comments »

Now before I get started on this little demonstration of how I do it, let me caution you on a couple things. IF you try anything like this, take the plate that your saw blade comes up through and close that hole completely up with a thin piece of wood. Make sure it is even with the top, with no g...

Make a Folding Out Feed Table for your Table Saw

02-20-2013 05:22 PM by | 17 comments »

This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slig...

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #8: Part 8 - Tips and Tricks on Using a Hand Brace

10-25-2011 04:00 AM by | 75 comments »

Sorry it has taken me so long to post the final part to this blog series. Life just gets in the way sometimes. However, here it is and I hope you enjoy it. In this episode I wanted to look at using a hand brace and explore some of the so called hints and tips out there to see if they really are u...

My under \$100 wide drum sander (a work in progress)

10-18-2008 03:02 PM by | 26 comments »

I mill wide boards. I have been slipping some of them in the side door of a local cabinet shop when I need them surfaced, but that is getting to be a hassle. I decided to make a wide drum sander. Not really a thickness sander since I mill my own lumber, just a sander to take the sawmill marks out...

02-03-2008 10:25 PM by | 38 comments »

Grab some popcorn… I made a movie!(Make sure the volume is up… it might be a little quiet) Story:I have been working really hard to tune up my bandsaw lately. I really wanted one of these:...for tensioning and detensioning the blade. But I am at the end of my budget and can’...

Shop Built Clamps

07-02-2012 04:52 PM by | 15 comments »

Lately I’ve been looking around trying to find inexpensive ways to make clamps to use in the shop. I think of my purchased commercially available clamps I own two 3 foot bar clamps and three Quick Grip clamps, plus two old c-clamps. Bar Type Clamps: The first information I found about...

1 2 3 4 ... 574 next »
5737 videos

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.