| Blog series by uMinded | updated 01-28-2015 12:33 PM | 1 part | 23896 reads | 11 comments total |
Part 1: My R4512 Setup
Totally set up R4512 cast iron table saw. Lee valley brand router table insert 05J25.01 router is a BOSCH 1619 EVS which is a beast. Outfeed table out of three door hinges and a piece of planed to thickness 2×4 and 5/8 birch MDF. Recycled front fence from old crosscut sled. Maple with a T-slot extrusion. NOTES:1) If you tighten the blade lift handle with the center nob the blade misalignment goes away! I figured mine was good as I ALWAYS tighten mine (Prevent lifting with a ...
