LumberJocks

turnkey47's Forum Topics

  • Advertise with us
View turnkey47's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (4)buddies (0)favorites (2)activity logWatch
12-27-2013 11:00 PM

jet 14 in. bandsaw tension rod is frozeup!! - 9 replies

went to change the blade in the bandsaw and the tension rod will not turn either way completrly froze up..was an old blade so i cut that off and tried again nothing still froze…i can see small black filings on the thread…is the rod or square nut stripped? if that is the problem will i have to cut the threaded rod in order to get to...

10-05-2013 07:10 PM

performax 16-32 sander - 7 replies

there is a performax 16-32 drum sander listed on craigslist for $450 which includes infeed/outfeed tables,mobile base and extra rolls of sandpaper..seller says this is a 1hp motor,hardly used and purchased new in 1999..would this sander be a good buy or one to stay away from as it is an older model??

12-09-2012 10:50 AM

16-32 sander question - 16 replies

i would like to purchase a jet 16-32 drum sander,but only have one dedicated 20 amp outlet which i use for my 1 1/2 hp dust collector…i would like to know if anyone has used their 16-32 with a shop vac or have they plugged their sander into 20 amp outlet with lights also on the circuit…i know what the correct answer is two 20 amp out...

07-23-2012 07:22 PM

pals system won't let me set my blade to 45 degrees - 7 replies

installed the pals system on my powermatic 64a tablesaw a while back…everything went very smooth and got the blade lined up easily…went to set my blade to 45degrees last week and it only allowed me to go to 40 degrees…the reason being is that the rod tilting the blade is hitting on the stud that was installed for the pals…...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com