All Topics | Replies | Last post |
---|---|---|
Opinions on LathesI’m taking the plunge into turning. I took a 2 day class last weekend ... |
29 | 05-06-2022 02:36 PM |
Possible to turn brass or aluminum on wood lathe?I’m still fairly new to turning, so I’m still learning the basics... |
29 | 05-01-2022 06:07 PM |
Turning a Spindle with a hole in the lengthI am still fairly new to woodturning, have done a couple of projects, but I a... |
9 | 04-23-2022 12:45 AM |
MIDI Lathe chuck jaw sizes?So, I did a little research here and there, and found some older posts about ... |
5 | 03-25-2022 06:18 PM |
Lathe ID/ Tailstock HelpI am new to turning and recently picked up my first lathe I’m not sure ... |
9 | 03-14-2022 04:01 PM |
2022 Bowling League (Turning Swap)A woodworking swap vaguely related to bowls and turning. . If you are n... |
2725 | 03-14-2022 02:40 AM |
Ideal Dimensions of a hand plane front knobDisclaimer: I am a handplane heretic. I don’t restore early 1910 Bailey... |
43 | 03-07-2022 03:40 AM |
Strange markings during turningFirst of all; Hi everybody. I am a relative new woodturner.I started a few... |
12 | 02-14-2022 04:36 PM |
My first successful segmented bowl after a few failed attemptsHello everyone After a few failed attempts I finally finished a segmented ... |
8 | 02-01-2022 03:30 PM |
Richard Raffan Woodturning VideosEvery so often, turners on this forum ask for recommendations on turning vide... |
4 | 01-25-2022 06:32 PM |
Building a Lathe from Scraps: An Interactive Build LogSee this scrapyard? If you look closely you’ll see these: A few m... |
87 | 01-19-2022 03:18 AM |
Lathe Cabinet Design QuestionsI recently picked up a used Jet lathe similar to the one in the pic below (bu... |
17 | 12-26-2021 10:38 PM |
Tenon IssuesI am fairly new to wood turning and I’ve been having issues with my ten... |
9 | 12-26-2021 02:49 AM |
18” birds eye maple platter with pewter castingI turned this platter and 4 others yesterday, this was the only one I did a p... |
9 | 12-24-2021 01:09 AM |
making top to RTIC stainless steel coffee mugOk, so here is the situation, my favorite stainless coffee tumbler I’ve... |
10 | 12-23-2021 02:03 PM |
Pewter casting and wood turningI turned a large platter for my sister in law for Christmas and I’m planning ... |
1 | 12-20-2021 01:52 PM |
Carbide hollowing tool?Hello all! I’m looking into purchasing a hollowing tool for my lathe so... |
10 | 12-16-2021 02:50 AM |
My first root ball bowlHi ,new here ,if this is Phil’s site I want you to know you sir have in... |
1 | 12-04-2021 10:06 PM |
Help with a Jet 1220VS LatheI recently purchased a barely used Jet 1220VS Lathe that has sitting in a gar... |
9 | 12-03-2021 11:07 PM |
Pen Turning IIWhat Pens do you like turning the most? Click pen or Twist pen” W... |
52 | 11-10-2021 03:13 PM |