LumberJocks

Woodworking forum topics tagged with 'sled'

  • Advertise with us
All Topics Replies Last post
View johnycash99's profile

Drying 2" Ash Slabs for Countertops

10-23-2020 06:47 PM by johnycash99 in Wood & Lumber

Hey everyone – new to the forum here! I had some questions regarding...

4 10-23-2020 10:34 PM
View BigMig's profile

Is Jointing on Router Table or Table Saw Long-Term Feasible?

10-05-2020 10:18 PM by BigMig in Power Tools, Hardware and Accessories

My “shop” is in the basement of my 100 year old house. There are...

27 10-10-2020 09:40 PM
View Magnous's profile

Can I get by without a jointer?

08-19-2020 01:27 PM by Magnous in Power Tools, Hardware and Accessories

Does anyone have experience that they can share about using a tablesaw sled f...

25 08-21-2020 04:34 AM
View Pizzadave's profile

Square sled fence

04-20-2020 07:23 PM by Pizzadave in Jigs & Fixtures

I just built my first table saw crosscut sled. Pretty happy with the results....

2 04-20-2020 09:53 PM
View stripit's profile

planng thin strips

04-16-2020 08:09 PM by stripit in Woodworking Skill Share

Hi, I need to plane some 2 3/16” strips down to 1/8”, the strips ...

12 04-17-2020 02:38 PM
View Horus's profile

Adjustable Flattening Sled

09-29-2019 05:55 PM by Horus in Jigs & Fixtures

The concept was to build a router plane system that would not consume valuabl...

5 09-30-2019 01:38 AM
View dbw's profile

Incra Express Sled

09-27-2019 12:30 PM by dbw in Power Tools, Hardware and Accessories

I purchased one of these and I want to use it with an Incra 1000SE gauge. Pri...

5 09-28-2019 01:31 AM
View OregonTreeHead's profile

SkilSaw Rip Guide Attachment - SkilSaw Circular Saw

12-17-2018 02:04 PM by OregonTreeHead in Power Tools, Hardware and Accessories

I have the SkilSaw 5150 10Amp Circular saw.. I just acquired the rip guide at...

0 12-17-2018 02:04 PM
View Beemer88's profile

Flattening large wood slabs

07-23-2018 12:44 PM by Beemer88 in Wood & Lumber

Hi everyone, I’m new to lumberjocks in fact this is my first post.So I&...

2 07-23-2018 03:22 PM
View Dwain's profile

So How Accurate is Acceptable on My CrossCut Sled?

09-09-2017 06:55 AM by Dwain in Jigs & Fixtures

So I recently put together a large crosscut sled (30” x 36”) for ...

24 07-22-2018 02:58 AM
View TheWoodenOyster's profile

I'm thru with the crosscut sled, Incra here I come

12-01-2014 11:24 PM by TheWoodenOyster in Jigs & Fixtures

Hey guys, This past week, I made it a goal to replace my old not-so-accura...

32 04-17-2018 12:33 PM
View ohtimberwolf's profile

I am totally lost as to how this could happen and need help figuring it out

04-08-2018 01:19 AM by ohtimberwolf in Power Tools, Hardware and Accessories

Here is what is driving me bananas. I built a sled according to the 5 cut ...

30 04-09-2018 07:03 PM
View ToddTurner's profile

Heard of GRRR-ripper & Dubby?? JUNK!!!!! Read this..

04-12-2010 02:25 AM by ToddTurner in Power Tools, Hardware and Accessories

I went to th woodworking show in DC yesterday and had a great time. Every too...

81 11-23-2017 03:07 AM
View GR8HUNTER's profile

MAKING NEW SLEDS

10-06-2017 03:50 PM by GR8HUNTER in Jigs & Fixtures

hello all …..I will be making new sleds for TS …BS …..maybe...

10 10-07-2017 01:09 AM
View amughal's profile

ALTENDORF PART

07-19-2017 01:53 PM by amughal in Power Tools, Hardware and Accessories

Hi Fellas, I’m looking to add a screw on handle for the sled of my A...

1 07-19-2017 02:37 PM
View SusanS's profile

Opinion Wanted on Planing with Router vs Hand Power Planer

07-15-2017 07:03 PM by SusanS in Power Tools, Hardware and Accessories

Hi,I was extremely fortunate enough to be the first responder on a Craigslist...

10 07-16-2017 04:10 PM
View redesigningwood's profile

Bought my first real table saw (sort of)

04-26-2017 12:39 PM by redesigningwood in Power Tools, Hardware and Accessories

I finally found a really good deal on a full size(ish) table saw i found on c...

7 04-27-2017 12:02 AM
View SSMDad's profile

Table saw sled question

05-07-2011 03:16 AM by SSMDad in Designing Woodworking Projects

Hi Everyone, Being cooped up inside from knee surgery has been driving me ...

8 02-09-2017 02:37 PM
View DavedA's profile

My New Upgrade - TS3650

11-12-2016 04:13 AM by DavedA in Power Tools, Hardware and Accessories

I am setting out on a large project list for the house, and some much needed ...

12 12-09-2016 07:46 PM
View oktams's profile

Porter Cable table saw

11-21-2016 02:46 PM by oktams in Power Tools, Hardware and Accessories

I have a Porter Cable Jobsite table saw…everything was fine, then it wa...

0 11-21-2016 02:46 PM

1 2 3 4 next »
61 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com