All Topics | Replies | Last post |
---|---|---|
wax both sides?I’m finishing a table top, two coats of Watco Danish Oil on top and bot... |
5 | 05-03-2022 03:29 PM |
New Jointer - Removing Oil From TablesGreetings, Just bought a Jointer and both tables have a fair amount of oil... |
6 | 06-27-2021 06:44 PM |
Experience with Collinite 885 for cast iron tops? Or any other paste wax with minimal silicone?So, I know it might be blasphemy around here, but I don’t like Johnsons... |
10 | 03-01-2021 03:44 AM |
Questions regarding makita 2708 table sawI recently acquired a makita 2708 table saw that isn’t in the best of s... |
1 | 01-27-2021 03:30 PM |
Which Paste Wax do you prefer and why?I have three in stock—Trewax, Johnson’s and Briwax. These are pa... |
24 | 03-31-2020 05:09 AM |
waxing unfilled MahoganyHi folks, I’ve been working on an African mahogany shelf this weekend a... |
5 | 05-28-2019 04:27 PM |
Milk paint issuesIf anyone has any experience with milk paint , I could use some help. I built... |
3 | 06-07-2017 05:01 PM |
Getting white specks out of a waxed poly finishHey all, I’m in a bit of a pickle. I was in the final step of a proj... |
5 | 02-14-2017 12:11 PM |
Paste Wax w/Tung Oil over Shellac?I know there are lots and lots of questions about tung oil on here, but I cou... |
20 | 02-07-2017 11:40 PM |
Paste Wax consistencyHi everyone. I bought a canister of Johnson’s Paste Wax (the yellow ... |
8 | 02-22-2015 05:42 AM |
How long to wait to paste wax over Arm-R-Seal?I’m going to use some Johnson’s paste wax over a bookcase that ha... |
6 | 08-25-2014 12:24 AM |
Finishing a bookcase - Paste Wax?I built a pine bookcase for a baby/kid’s room (will have books, toys, b... |
13 | 08-15-2014 02:11 AM |
Appropriate Wood finish for bathroomI need a little help…...truth be told A LOT of help. I’m new t... |
2 | 07-16-2014 12:39 AM |
antique sc johnson and sons waxPicked this up today… antique wax that hasnt gone over yet. The hue lo... |
5 | 10-20-2013 10:03 PM |
Opinions on Teflon Spray V. Paste wax for unfinished metal?Hey folks, Restoring an old jointer, and I asked my wife to pick up some J... |
4 | 01-09-2013 02:41 PM |