LumberJocks

Woodworking forum topics tagged with 'oil'

  • Advertise with us
All Topics Replies Last post
View davemw429's profile

Need help with HVLP and oil paint

04-14-2021 11:32 AM by davemw429 in Finishing

I could use some feedback on a finishing problem. I have used my Fuji HVLP su...

10 04-15-2021 06:13 PM
View Landscpr's profile

Sharpening stones oil and water. can I bring one back from the oily depths.

02-17-2021 01:35 PM by Landscpr in Hand Tools

Hi group, Long time reader, this may be my first post. I’m not even ...

13 02-18-2021 01:54 AM
View Frankie19's profile

Rubio Monocoat finish blotchy

12-04-2020 05:56 PM by Frankie19 in Finishing

Hi all, Looking for opinions on the look of this finish. Rubio Monocoat pu...

6 12-05-2020 07:11 PM
View 12point's profile

Can I put Oil based Poly over Water Based Poly?

06-10-2020 11:39 PM by 12point in Finishing

I built a table for a friend. Table is made of pine. I used a water based pol...

22 06-13-2020 09:51 PM
View Ross2627's profile

How do I choose the right foodsafe finish

05-18-2020 11:22 PM by Ross2627 in Finishing

I’m in desperate need of help here. I’ve always been terrible at ...

16 05-19-2020 05:26 PM
View OldSoulArtCo's profile

Best Readily Available Finishes for Butcherblock Countertops??

04-18-2020 11:24 AM by OldSoulArtCo in Finishing

Hoping to get some quick answers on this. Research gives me 100 opinions. I&#...

4 04-18-2020 06:53 PM
View Bob_Ross_2_point_0's profile

Video movie/tutorial on how I made 2 of my bandsaw boxes.

03-24-2016 02:22 PM by Bob_Ross_2_point_0 in Designing Woodworking Projects

Hello. I am just posting a couple videos I did of my 2’nd and 3’...

4 01-03-2020 05:29 AM
View JeffRadford's profile

Residue - Watco Danish Oil

06-23-2019 04:01 AM by JeffRadford in Finishing

Hey there folks - So I’m a NOVICE in regards to working with and fin...

20 09-16-2019 04:03 AM
View Holbs's profile

using 2 router edge guides with 2 rods for mortise or hog out. O1 steel question

02-19-2019 10:04 PM by Holbs in Power Tools, Hardware and Accessories

While digging into Roubo workbench construction I am pursuing, I came across ...

11 02-20-2019 05:50 PM
View WaffleM's profile

Finish that gets shinier with handling?

07-24-2018 01:31 AM by WaffleM in Finishing

Many years ago a local woodworker made a bunch of crosses for a elderly bible...

6 07-25-2018 01:21 AM
View SchwaNa's profile

Polyurethane Spray too thick and runny. Please help...

05-21-2018 06:00 PM by SchwaNa in Finishing

Hello All, Total newbie here. I’m working on my first wood project. A M...

16 05-24-2018 03:59 PM
View M2D2's profile

Start to FINISH ....Is my logic wrong? Lots of questions..look for ??? ideas ???

04-21-2018 01:33 PM by M2D2 in Designing Woodworking Projects

sorry i asked

2 04-21-2018 02:42 PM
View Lazyman's profile

Best Finish for Ipe Deck

11-05-2017 04:33 PM by Lazyman in Finishing

..Well it is actually for a pickup truck bed replacement. A friend of mine i...

12 11-15-2017 02:58 PM
View SawTooth1953's profile

Watco Oil - How do you open the darned can?

11-03-2013 03:24 PM by SawTooth1953 in Finishing

I just bought a quart of Watco Danish Oil. I am not weak; my hands are not ar...

31 08-06-2017 12:12 AM
View Bradb7888's profile

Finish over tung oil

05-08-2017 04:11 AM by Bradb7888 in Finishing

First off, I apologize for asking a repeat question but I’ve read sever...

6 05-08-2017 10:39 AM
View rachelpres's profile

How should I seal my outdoor Cypress porch posts?

04-20-2017 02:48 AM by rachelpres in Finishing

Hi everyone. I’m new to this site, but I have enjoyed reading all the ...

4 04-20-2017 06:50 PM
View drm11981's profile

need help! best workbench finish? oil base paint, latex, or stain and poly?

04-09-2017 08:19 PM by drm11981 in Finishing

Hey all! I am at the point of pure confusion…There is so many different...

2 04-10-2017 08:41 PM
View Cheapguy82's profile

Finishing to Bring Out Figure

01-09-2017 09:02 PM by Cheapguy82 in Finishing

I watched a video recently where the guy said to really make any curl/figure ...

2 01-10-2017 06:58 PM
View Marshall's profile

Durability of Sam Maloof's Finish

11-01-2012 08:52 PM by Marshall in Finishing

Hello, I’m building a blanket/toy chest out of black walnut for my s...

27 01-10-2017 05:14 PM
View Dave Rutan's profile

Unfinished finish?

12-17-2016 09:41 PM by Dave Rutan in Finishing

Is there a term for when a piece of furniture, usually a chair, is sanded smo...

6 12-18-2016 02:11 AM

1 2 3 4 5 next »
83 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com