Woodworking forum topics tagged with 'heat'

  • Advertise with us
All Topics Replies Last post
View MJClark's profile

HVAC in a garage woodshop

05-28-2019 02:19 AM by MJClark in Focus on the Workspace

I took a few months off as I acquired some new tools including a used 220v de...

48 08-19-2021 03:45 PM
View Rayray008's profile

Dust Collection Venting Outside

11-10-2020 11:55 AM by Rayray008 in Power Tools, Hardware and Accessories

Hello, I’ve seen this topic covered quite a bit. Most often the subject of...

11 11-11-2020 12:21 AM
View Jimothy's profile

I think heat from belt sanding made my glue joint come apart.

07-09-2020 06:16 AM by Jimothy in Joinery

So I glued up some wenge/birch panels together, and I left them for about 2 h...

22 07-10-2020 02:48 AM
View Warren 's profile

Convert a wood burner to a sawdust burner

10-28-2019 05:15 PM by Warren in Power Tools, Hardware and Accessories

Hi all, I recently bought a wood burning stove for my shop and really I wa...

17 11-14-2019 09:36 AM
View trsnider's profile

Wood for commercial pizza peel

08-13-2019 03:19 PM by trsnider in Wood & Lumber

I have a chance to make a pizza peel that will be used in a restaurants wood ...

16 08-19-2019 03:18 AM
View CapeVerde's profile

Can I repair this darkened/burned spot or is a full refinish required?

05-01-2019 01:23 PM by CapeVerde in Finishing

Light colored kitchen table has a circular dark area approx 8” across c...

3 05-02-2019 03:12 PM
View trsnider's profile

heat for garage/shop?

11-13-2018 02:40 AM by trsnider in Focus on the Workspace

I have a double burner propane heater (like this

33 11-17-2018 06:50 PM
View Joe's profile

Proper MDF Application

11-04-2018 01:04 PM by Joe in Wood & Lumber

Hello All, I’m building my first project with MDF and now that it’s finish...

6 11-04-2018 06:17 PM
View rcollege's profile

Good woods for Heat Resistance

06-25-2018 07:56 PM by rcollege in Wood & Lumber

Hello all, First day here at LumberJocks… You guys seem to know your...

12 06-26-2018 05:01 PM
View Wes925's profile


02-12-2018 02:36 PM by Wes925 in Wood & Lumber

I live in Brentwood CA 94513. It’s in northern CA/ the Bay Area. I found this...

2 02-15-2018 08:27 PM
View Bill Berklich's profile

Shop is just too cold

12-28-2017 04:39 PM by Bill Berklich in Focus on the Workspace

Ok, unheated garage is just too cold to work in this week. Moving ops to the ...

28 12-30-2017 02:12 AM
View theshed's profile

mini split heat pumps in cold climates

11-01-2017 12:12 PM by theshed in Focus on the Workspace

I am at the point of making a decision on a heating source for my new worksho...

1 11-01-2017 12:21 PM
View Damo72's profile

Needing advise for wood with high temperature rating

07-30-2017 04:17 AM by Damo72 in Wood & Lumber

I’m after any advice for what would be the best type of wood to use to ...

6 07-30-2017 02:13 PM
View quasarwutwut's profile

Am I wasting my time with heating?

10-03-2016 03:50 PM by quasarwutwut in Focus on the Workspace

Hi everyone. I’ve done some investigating on here and didn’t see...

28 10-05-2016 03:07 PM
View TrialThroughError's profile

Killing it with Fire

06-25-2015 03:02 PM by TrialThroughError in Wood & Lumber

Morning friends, To summarize so you don’t have to read the whole th...

7 06-26-2015 08:05 PM
View Henebrecht's profile

I need some advice on a problematic tablesaw...

05-29-2015 02:00 PM by Henebrecht in Power Tools, Hardware and Accessories

I very recently bought a Grizzly 1023 RLWX 5 HP left tilt orderi...

7 06-05-2015 02:24 PM
View birdsmouth's profile

Can I run a propane heater indoors?

10-20-2014 01:17 PM by birdsmouth in Focus on the Workspace

My question is – can I safely use an infrared, ventless, propane powere...

2 10-20-2014 04:42 PM
View msparky14's profile

Shop Heat

12-11-2013 02:59 AM by msparky14 in Safety in the Woodworking Shop

I was reading some posts from other people who were wanting to know the best ...

26 03-12-2014 12:48 PM
View RobertStix's profile

Northeast Iowa - Heating a detached shop?

05-31-2013 03:29 PM by RobertStix in Focus on the Workspace

I’m building a new shop because my wife wants to put our addition into ...

36 02-06-2014 11:44 AM
View Matt Przybylski's profile

Considering this AC/heater, thoughts?

07-14-2013 11:51 PM by Matt Przybylski in Focus on the Workspace

It’s hot here in the Chicago area (and extremely humid) and I’ve ...

8 07-15-2013 10:30 PM

1 2 next »
27 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics