Incra Ultra Lite Jig clamping

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by panofish posted 04-21-2009 07:21 AM 2647 views 1 time favorited 6 replies Add to Favorites Watch
View panofish's profile


36 posts in 4157 days

04-21-2009 07:21 AM

I bought an incra ultra lite jig and I’m curious what you guys think about how I should clamp it to my table. I explain more detail in a video clip on my blog…

-- Alan Lilly,

6 replies so far

View Gary's profile


9393 posts in 3731 days

#1 posted 04-21-2009 03:04 PM

Personally, I think you have the best solution, using another T slot.

-- Gary, DeKalb Texas only 4 miles from the mill

View odie's profile


1691 posts in 4138 days

#2 posted 04-21-2009 03:42 PM

I would drill down through the table and use a handle with a built in bolt and a “T”-nut underneath. I have done something similar to my tables. I would add a little epoxy on the “T”-nuts so stay in the table. The “T”-track is also a great idea.

That’s a great looking blog you have. Are you sure you want to brave it out here? This your second post in almost two years.

-- Odie, Confucius say, "He who laughs at one's self is BUTT of joke". (my funny blog)

View jollygreen445's profile


1 post in 3409 days

#3 posted 04-28-2011 08:30 AM

To me, it looks like turning the router table end for end having the curent “T” slot between the insert and the saw table would solve your problem. You would be able also to leave the Incra Jig set up, as it would not be in the way as often placed on out board end of the table…... I bought an Incra Jig but as yet have not set it up…

View panofish's profile


36 posts in 4157 days

#4 posted 04-28-2011 03:43 PM

Here is the actual solution I implemented…

-- Alan Lilly,

View ClayandNancy's profile


521 posts in 3313 days

#5 posted 04-28-2011 04:24 PM

That’s a great solution, might be on the large size but with 4 magnets over that span must hold pretty good. Nice job.

View rance's profile


4271 posts in 3458 days

#6 posted 04-28-2011 06:03 PM

One of the best fence solutions I’ve seen on a TS mounted router when you have the room. Very nicely done. The other hidden fact is that your Incra fence ‘could’ be reversed to work with the TS too. This could be the next contender for SOS.

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics