Any scrollers have $1000 burning a hole in their pocket?

« back to Scrollsawing forum

Picklehead

home | projects | blog

1055 posts in 2935 days

12-02-2014 01:48 AM

Topic tags/keywords: scroll saw scrollworking

Then you’ll want to snatch THIS up before somebody else does!

Richards industrial scroll saw – $1000 (ludlow vt.)

-- Quote from ebay tool listing: " Has nicks and dings wear and tear dust and dirt rust and pitting but in good working condition"

1 reply so far

Mareng

home | projects | blog

7 posts in 873 days

#1 posted 10-15-2018 01:03 PM

If I were living close by, this is something that would certainly interest me. Just wondering what type of blades this beast takes. Regular 5” blades?

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	13194
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2811
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	568
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	416
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1891
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6338
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7903
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	32738
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	329
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6450
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1803
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7275
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1631
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2630
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1272
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5412
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2396
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9653

	Author	Latest activity	New comments or replies since you last checked
Off-topic content. Click to see the post.	chrisstef	02-26-2021 01:01 AM	sign in to get readership tracking
What table saw blade or bit do you recommend	ohtimberwolf	02-26-2021 12:59 AM	sign in to get readership tracking
Off-topic content. Click to see the post.	corelz125	02-26-2021 12:57 AM	sign in to get readership tracking
Northwest Coast Elbow Adze	Jamie	02-26-2021 12:57 AM	sign in to get readership tracking
Wired Bowl	Jim Jakosh	02-26-2021 12:55 AM	sign in to get readership tracking
2021 Surprise Swap	clieb91	02-26-2021 12:49 AM	sign in to get readership tracking
Extreme Birdhouses . Fresh out of the Shop !	john	02-26-2021 12:43 AM	sign in to get readership tracking
Assembly Required with April Wilkerson	laterthanuthink	02-26-2021 12:38 AM	sign in to get readership tracking
Apply varnish to brand new dining table?	JASheehy	02-26-2021 12:31 AM	sign in to get readership tracking
Off-topic content. Click to see the post.	Jim Jakosh	02-26-2021 12:31 AM	sign in to get readership tracking

Any scrollers have $1000 burning a hole in their pocket?

1 reply so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Off-topic content. Click to see the post.

What table saw blade or bit do you recommend

Off-topic content. Click to see the post.

Northwest Coast Elbow Adze

Wired Bowl

2021 Surprise Swap

Extreme Birdhouses . Fresh out of the Shop !

Assembly Required with April Wilkerson

Apply varnish to brand new dining table?

Off-topic content. Click to see the post.

Any scrollers have $1000 burning a hole in their pocket?

1 reply so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...