Earlex Spraystation 5500

« back to Woodworking Trade & Swap forum

434 posts in 3324 days

09-06-2014 07:48 PM

Earlex Spray Station 5500

Works fine but the cup was put away dirty last time it was used so it does need to be cleaned. I got it 90% clean so it shouldn’t take more than 15-20 mins to get it to 100%.

Bought it from Woodcraft a couple years ago but exited the hobby last year and no longer need it. $100 firm and you pay actual shipping cost. This retails for $330 at Woodcraft right now so I feel like $100 is a very fair price for someone that will put it to good use. It comes with two needles, don’t know what size they are but they’re the ones that came with it.

7 replies so far

pjswoodshop home \| projects \| blog 41 posts in 1796 days #1 posted 09-09-2014 10:40 AM	Very fair price. Is that a picked up price, or are you willing to ship?
ajhellman home \| projects \| blog 3 posts in 1688 days #2 posted 09-09-2014 06:27 PM	Hi Vrtigo1. I’d definitely be interested if you’re willing to ship to Milwaukee, WI. Thanks, Adam
distrbd home \| projects \| blog 2252 posts in 2779 days #3 posted 09-09-2014 06:35 PM	I sent a private message this morning,I doubt you would be willing to ship to Canada but I had to try. -- Ken from Ontario, Canada
firefighterontheside home \| projects \| blog 20099 posts in 2189 days #4 posted 09-09-2014 06:59 PM	If I didnt already have one, I would have said, Hell Yes. The sizes of the needles would be 2.0 and 1.5. 2.0 better for painting and 1.5 for finishing. -- Bill M. "People change, walnut doesn't" by Gene.
Vrtigo1 home \| projects \| blog 434 posts in 3324 days #5 posted 09-09-2014 10:14 PM	Yes willing to ship but would rather not deal with Canada, sorry. PJ or Adam, not really sure what protocol is in terms of who has dibs, I suppose pj you have the first shot since you commented first. You want it?
sikrap home \| projects \| blog 1121 posts in 3691 days #6 posted 09-10-2014 03:15 AM	FWIW, I sent a PM to you yesterday about this asking fro a shipping cost. -- Dave, Colonie, NY
sikrap home \| projects \| blog 1121 posts in 3691 days #7 posted 09-12-2014 07:24 PM	Is this still available? I never did get e response to the PM I sent. -- Dave, Colonie, NY

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12481
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2419
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	484
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	366
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1567
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	5451
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7168
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	29895
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	257
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5820
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1539
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	6669
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1478
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2330
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1214
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4999
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2274
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9177

	Author	Latest activity	New comments or replies since you last checked
More Sunjka Boards Mk III ( I hope)	robscastle	04-25-2019 04:38 AM	sign in to get readership tracking
Oxalic Acid staining Question	robscastle	04-25-2019 04:30 AM	sign in to get readership tracking
leigh vrs4200 vacuum & router support	pottz	04-25-2019 04:27 AM	sign in to get readership tracking
Help me price a saw (and planer), please!	BusterBrown	04-25-2019 04:21 AM	sign in to get readership tracking
Advice wanted on planned dust collection system	BusterBrown	04-25-2019 04:15 AM	sign in to get readership tracking
Idiot clamp storage	Madmark2	04-25-2019 04:12 AM	sign in to get readership tracking
mjb49's Profile	mjb49	04-25-2019 04:06 AM	sign in to get readership tracking
Rimu and American cherry bentwood rings	kiwilynne	04-25-2019 04:05 AM	sign in to get readership tracking
Repairing 1950s Dresser Sag	DerekJ	04-25-2019 03:57 AM	sign in to get readership tracking
Possible to apply a harder finish over Rubio Monocoat? (4 months later)	Mark	04-25-2019 03:53 AM	sign in to get readership tracking

Earlex Spraystation 5500

7 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...