Looking for an Edge Sander

Where are you at? I’ve seen a either a 60” or 80” grizzly on craigslist in Baton Rouge, la for a while.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

Just to clarify, you’re looking for a total belt length no less than 60” correct? Making sure you’re not looking for an edge sander with at least 60” of work table on each side, they do exist and they are gigantic for even a decent sized cabinet shop.

-- “I never in my life thought I would have to say this, but the proper role of government is not to fund the distribution of crack pipes,” Lauren Boebert

PM with location, if you want, maybe we should talk.

-- Dan V. in Indy

It’s a compromise, but some stroke sanders will do edge sanding. Mine
can do about 8’ but the piece has to be held on edge on top of the
machine, or mounted to the table underneath. The only full-length
platten is on top. An edge sander with a 60” platten is a pretty
big machine and would need to take a belt at least twice that length.

Here’s a 127” edge sander on ebay http://www.ebay.com/itm/Crouch-6x127-Edge-Sander-3ph-220V-/281380065894?pt=LH_DefaultDomain_0&hash=item41838f1266

Just to clarify, you re looking for a total belt length no less than 60” correct? Making sure you re not looking for an edge sander with at least 60” of work table on each side, they do exist and they are gigantic for even a decent sized cabinet shop.

- bigblockyeti

60-80” total belt length, about 20-30” workable sanding area per side.

Don’t know if you ever found one or not, but I’m considering selling my G1140 if you’re still interested.

-- “I never in my life thought I would have to say this, but the proper role of government is not to fund the distribution of crack pipes,” Lauren Boebert

Don t know if you ever found one or not, but I m considering selling my G1140 if you re still interested.

- bigblockyeti

I put the purchase on hold and decided to upgrade the table saw last year instead.