LumberJocks

ISO: Manual for Jet JWTS-10 #708471 (Blue, from 1990s)

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by malcolmdotcom posted 06-18-2014 02:02 AM 9566 views 0 times favorited 12 replies Add to Favorites Watch
View malcolmdotcom's profile

malcolmdotcom

8 posts in 3274 days


06-18-2014 02:02 AM

Topic tags/keywords: jet table saw manual vintage tools restoration

I have the 708100 copy that is commonly available. This is not my saw, however. I’ve been searching for the saw manual for my saw. I really only want the parts diagram. I need to do bearing job on it.

If anyone has and is willing to scan/take picture of the diagrams or the whole manual it would be appreciated.


12 replies so far

View knotscott's profile

knotscott

8300 posts in 3823 days


#1 posted 06-18-2014 08:38 PM

The Jet 708100 was their “Workshop” hybrid style contractor saw with the motor inside the enclosure. Does yours have an inboard motor also, or is it hanging off the back like a traditional contractor saw like a 708301k? They look similar from the front, but have different designs under the hood and back.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View malcolmdotcom's profile

malcolmdotcom

8 posts in 3274 days


#2 posted 06-18-2014 09:42 PM

It’s a traditional Contractor Saw with the motor hanging off the back. I found an old manual for a Powermatic 63 Artisan from the mid-90s that was probably off the same assembly line, but it wasn’t much help identifying the bearings required. Does anyone have the 708301k manual?

View knotscott's profile

knotscott

8300 posts in 3823 days


#3 posted 06-18-2014 11:43 PM

This might help….see page “B”. http://www.ereplacementparts.com/jet-jwts10jf-708301-table-saw-parts-c-32652_32759_168412.html

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View malcolmdotcom's profile

malcolmdotcom

8 posts in 3274 days


#4 posted 06-19-2014 12:36 AM

I found the manual for the 708301k. It looks really close to the 708471 I have. The bearings are available on eBay for about $4. so I’ll get some and see if they are same size. Thanks for help.

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000056387.pdf

View Steve1339's profile

Steve1339

1 post in 1576 days


#5 posted 04-24-2015 07:19 PM

Malcolm,

Did you ever find a manual for the 708471 or did you just go with the one for the 708301k? I just bought one for $70 and need an overload protector for the motor and it is not listed in the parts for the 708301k.

View MOMark's profile

MOMark

1 post in 908 days


#6 posted 02-20-2017 05:43 PM

I’m new to this site, have a lot of years of experience, and may be late to this party. I have a Jet JWTS-10CW I purchased in Dec. of 1998. The Stock number on the machine is 708474 and the stock number on the receipt is 708373. Here is a link for a Jet saw that might apply http://www.ereplacementparts.com/images/jet/JWTS-10JF_(708301).pdf. Hope this helps.

View ziffer's profile

ziffer

1 post in 739 days


#7 posted 08-08-2017 05:19 PM

hello all, I have the manual for the model 708471. if you would like it E-mail me at [email protected]

View RDBESQ's profile

RDBESQ

14 posts in 162 days


#8 posted 05-15-2019 01:04 AM

Ziffer – Do you still have a copy of the manual for the Jet JWTS10- 708471? If so, is there a way for me to get a digital copy?

Thanks!

View Ligninleanin's profile

Ligninleanin

2 posts in 32 days


#9 posted 07-15-2019 08:50 PM

I am trying to get a copy of this manual. Any suggestion from those previous?

View Bill_Steele's profile

Bill_Steele

536 posts in 2179 days


#10 posted 07-16-2019 01:28 AM

I have this same model saw.

My manual is No. M-708301K rev. 1/96

I think this manual is the same as mine except for the picture on the front.

View Ligninleanin's profile

Ligninleanin

2 posts in 32 days


#11 posted 07-16-2019 02:18 AM

Ok thanks. Any idea where I might find a tilting shaft part#80. Seems to be obsolete and mine is broken.

View knotscott's profile

knotscott

8300 posts in 3823 days


#12 posted 07-16-2019 11:31 AM


Ok thanks. Any idea where I might find a tilting shaft part#80. Seems to be obsolete and mine is broken.

- Ligninleanin

I searched for the same part for the Grizzly G1022, Grizzly G0444, Jet 708301, Mao Shan TSC-10L and General International GI50-175, which I believe have similar, if not identical underpinnings as your saw, but it appears to be unavailable for all of them. You might have have some luck finding a donor saw on the cheap, or you might have to have the part made. There were other versions under the names Ohio Forge, Bridgewood, Trademaster, King Canada, AFF, Canwood and many others that way also share the same parts.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com