Spindles for Shop Built Spindle Sander

« back to Power Tools, Hardware and Accessories forum

17 posts in 2328 days

04-09-2014 04:39 PM

Topic tags/keywords: sander

I want to build a Oscillating Spindle Sander. Motor has a 1/2” Shaft. need to find spindles or adapters to fit the shaft. Any Ideas.

Thanks

-- If we can't fix it, It ain't broke

6 replies so far

JAY Made home \| projects \| blog 202 posts in 2847 days #1 posted 04-09-2014 04:48 PM	Not sure if this will help. 4 piece sanding drum set. -- We all should push ourselves to learn new skills.
NiteWalker home \| projects \| blog 2741 posts in 3379 days #2 posted 04-09-2014 10:39 PM	Ridgid’s EB4424 uses drums that are 1/2” inside diameter and 4 1/2” long. Look them up on ereplacementparts.com. -- He who dies with the most tools... dies with the emptiest wallet.
Shawn Masterson home \| projects \| blog 1325 posts in 2751 days #3 posted 04-10-2014 02:34 AM	ok You have my curiosity. I want pix to show how you are going to make it Oscillate. please, please, please
deputy4989 home \| projects \| blog 17 posts in 2328 days #4 posted 04-10-2014 03:04 AM	Will post picts of the build. When I get spindles. Using old garage door opener -- If we can't fix it, It ain't broke
SASmith home \| projects \| blog 1850 posts in 3790 days #5 posted 04-11-2014 01:29 AM	Shawn, here is a shop made OSS. deputy4989, it may give you some ideas. -- Scott Smith, Southern Illinois
Shawn Masterson home \| projects \| blog 1325 posts in 2751 days #6 posted 04-11-2014 02:05 AM	Thats some awesome stuff. Free parts always make it more fun to take on a project like this.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12960
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2699
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	539
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	396
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1777
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6068
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7653
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	31751
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	302
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6229
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1728
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7071
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1578
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2525
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1253
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5289
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2378
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9514

	Author	Latest activity	New comments or replies since you last checked
Off-topic content. Click to see the post.	chrisstef	08-07-2020 12:41 AM	sign in to get readership tracking
Stickley No. 336 Bow Arm Morris Chair	489tad	08-07-2020 12:38 AM	sign in to get readership tracking
4th Annual Lumberjocks Beer Swap!	HokieKen	08-07-2020 12:36 AM	sign in to get readership tracking
Mack Superliner 2	Alister89	08-07-2020 12:27 AM	sign in to get readership tracking
Crab....mostly rough cedar. 26" wide.	Brent Golden	08-07-2020 12:22 AM	sign in to get readership tracking
Wednesday Wkshp #1: Hope to keep this up	clieb91	08-07-2020 12:17 AM	sign in to get readership tracking
Bandsaw Tension Spring	ja6ke	08-07-2020 12:10 AM	sign in to get readership tracking
Plane Restoration #1: Marsh M5 (Day 01)	sansoo22	08-07-2020 12:10 AM	sign in to get readership tracking
What to look for in a drill press	TTH	08-07-2020 12:09 AM	sign in to get readership tracking
Wednesday Workshop 1- Delayed	clieb91	08-07-2020 12:08 AM	sign in to get readership tracking

Spindles for Shop Built Spindle Sander

6 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Off-topic content. Click to see the post.

Stickley No. 336 Bow Arm Morris Chair

4th Annual Lumberjocks Beer Swap!

Mack Superliner 2

Crab....mostly rough cedar. 26" wide.

Wednesday Wkshp #1: Hope to keep this up

Bandsaw Tension Spring

Plane Restoration #1: Marsh M5 (Day 01)

What to look for in a drill press

Wednesday Workshop 1- Delayed

Spindles for Shop Built Spindle Sander

6 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...