Will Craftsman Cast Iron Extentions Fit a Sawstop?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Tom148 posted 12-30-2013 12:21 AM 1028 views 0 times favorited 3 replies Add to Favorites Watch
View Tom148's profile


39 posts in 3545 days

12-30-2013 12:21 AM

I am planning to get a Sawstop Contractor model. The base model comes with fabricated steel wings which may be perfectly fine. But I have an older craftsman saw with perfectly good and flat cast wings. So I’m thinking that they might work well on the Sawstop.

So does anyone know if this will work? Also, I would appreciate comments regarding whether or not this is a good idea and why.


-- Tom

3 replies so far

View JustJoe's profile


1554 posts in 3319 days

#1 posted 12-30-2013 12:24 AM

There’s probably not a lot of people out there who just happen to have two saws, one by each maker. If you post a pic of your extensions with some measurements, maybe a shot of where they attach to the saw etc., then someone with the other saw could take a look and see.

-- This Ad Space For Sale! Your Ad Here! Reach a targeted audience! Affordable Rates, easy financing! Contact an ad represenative today at JustJoe's Advertising Consortium.

View toolie's profile


2210 posts in 3909 days

#2 posted 12-30-2013 12:25 AM

as long as you are willing to make any needed holes in the SS CI top OR in the CI extension wings, as long as the top and wings are both 27” deep, it should work fine.

-- there's a solution to every just have to be willing to find it.

View Tom148's profile


39 posts in 3545 days

#3 posted 12-30-2013 03:21 AM

I took a measurement and they are exactly 27 inches. So this just might work.

-- Tom

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics