Shopsmith Sanding Disc arbor hole diameter?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by HuckD posted 09-28-2013 01:03 AM 7211 views 0 times favorited 5 replies Add to Favorites Watch
View HuckD's profile


312 posts in 3166 days

09-28-2013 01:03 AM

Topic tags/keywords: shopsmith sanding sander disc disk

I’m kicking around the idea of building a dedicated 12” disc sander. I’ve searched here, ebay, and Shopsmith’s site and cannot find the arbor hold diameter on the Shopsmith sanding disc. Does anyone know the size?

-- Visit my Youtube Channel:

5 replies so far

View Loren's profile


11499 posts in 5100 days

#1 posted 09-28-2013 03:08 AM

5/8” I think.

View ddockstader's profile


226 posts in 4713 days

#2 posted 09-28-2013 03:46 AM

5/8” for sure. I own 2.

View Robert Keeney's profile

Robert Keeney

90 posts in 4964 days

#3 posted 09-28-2013 11:52 AM

5/8” I measured it to be sure.

A few examples of Shopsmith Mini/Shorty Sanding Stations

These are shortened to save space but if you can use it full size it can be used for other things as well. Used Shopsmiths are way cheaper than a 12 inch disk sander/belt sander combination and can be used for other things.

Ask over at the Shopsmith forum.

-- Robert in Tallahassee Florida,

View HuckD's profile


312 posts in 3166 days

#4 posted 09-28-2013 12:59 PM

Thanks guys. That’s what my motor is.

-- Visit my Youtube Channel:

View John's profile


341 posts in 5250 days

#5 posted 10-15-2013 12:59 PM

BadBob thanks for the sanding station shorty idea! i recently nabbed an old 500 that i’ll use for just that purpose

-- John - Central PA -

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics