20% OFF-- Lumberjocks only-- Freud Precision Shear Forstner Bits

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Built2Last posted 05-21-2013 02:48 AM 1574 views 0 times favorited 2 replies Add to Favorites Watch
View Built2Last's profile


234 posts in 3932 days

05-21-2013 02:48 AM

Topic tags/keywords: resource jig tip alder bubinga oak cedar drill-driver drill press router blade jointer plane sander tablesaw milling carving shaping turning finishing refurbishing scrollworking veneering joining sanding sharpening woodburning modern traditional greene and greene shaker arts and crafts rustic victorian

20% off sale is only available to Lumberjocks. 2” bits only $8.80, 1 3/8” bit $7.80 or 1/2” for only $3.20. These are a few of the low price after the 20% discount that once again is only for’ll find in my webstore. here is a link to the two inch bit on amazon. Even on sale its still 24.44 with shipping there.
If there is any lumberjocks out of the U.S. that is interested in any of the bits contact me thru the webstore or a pm on lumberjocks and I will give you a price on shipping.

You will need to enter the coupon code just like this LUMBERJOCKS20, if its not the same or if you don’t enter it the discount won’t show up.

I only charge actual shipping costs and if you buy more than one I will combine shipping. The website will show a shipping cost but its usually lower than what the website shows. You can either go ahead and pay and I’ll refund any overcharges on shipping or wait until I send an updated invoice. Depending on the size of the bits, i can usually get as many as 7 or 8 in a flat rate priority envelope at a cost of about $5.05, if just depends on the size of the bits.

Remember the coupon code is LUMBERJOCKS20 and it will expire june 2nd at midnight.

Here is the link to my webstore, if for some reason it doesn’t work, someone please let me know

Come See Me At Webstore

2 replies so far

View Built2Last's profile


234 posts in 3932 days

#1 posted 05-21-2013 07:22 AM

Thanks Mike, hope you enjoy the bits!!!!

View Built2Last's profile


234 posts in 3932 days

#2 posted 05-26-2013 02:00 AM

I am getting low on some of the bits I have for sale. Down to a dozen or less on the 1/2, 3/4 and twenty or so on the 7/8, 1 inch and 1 1/8. I still have plenty of the 1 1/4, 1 3/8, 1 1/2 and 2 inch. In case anyone is wonder, I shipped a fellow lumberjock one of each size, nine total, to Arizona today, via priority mail and the shipping cost was only $5.95. Thanks folks!!!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics