LumberJocks

Skilsaw 367 wormdrive saw

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by HR222 posted 04-03-2013 06:25 AM 9600 views 0 times favorited 5 replies Add to Favorites Watch
View HR222's profile

HR222

5 posts in 3162 days


04-03-2013 06:25 AM

I given a saw thats missing the parts that hold the blade. the arbor spacer, blade washer and bolt, and spring. As I have checked every source I can think of to locate these parts with no luck. seems the 367 is some what
ellusive as far as parts go. I was wondering If anyone on this site may know where II can find these parts
used or does anyone know if another model skilsaw parts will interchange. Any help would be great. I would hate to have to get rid of it. But it’s looking grim boys!


5 replies so far

View pjones46's profile

pjones46

1002 posts in 3925 days


#1 posted 04-05-2013 03:42 AM

You might try for an older models, call 1-877-SKIL-999 (1-877-754-5999) or email Skill Customer Service.

-- Respectfully, Paul

View tenontim's profile

tenontim

2131 posts in 5026 days


#2 posted 04-05-2013 10:51 PM

I’ll bet one of the saws on this page will have parts that fit your saw.
http://www.searspartsdirect.com/partsdirect/brands-products/Craftsman-Parts/Saw-Parts
Refine search by “worm drive”

View HR222's profile

HR222

5 posts in 3162 days


#3 posted 04-06-2013 12:15 AM

Hey thanks! By george if these craftsman don’t look just like a Skilsaw. Sears does say the part #’s have
changed from the manufacturer. which maybe Skilsaw. But skil Tech support claims all parts for the 367
are obsolete. Could be that Craftsman bought the rights to the saw. who knows.Anyway thanks again

View bigblockyeti's profile

bigblockyeti

7744 posts in 3002 days


#4 posted 06-16-2017 02:14 AM

I have two pretty old Skil 67 worm drive saws and a slightly newer 367 and it seems like the arbor parts changed quite a bit over not very much time. The only thing consistent was the blades which I’m now having a very hard time finding the right size with a diamond knockout to fit on the arbor.

-- "Lack of effort will result in failure with amazing predictability" - Me

View Streve Harris 's profile

Streve Harris

1 post in 38 days


#5 posted 10-21-2021 09:08 PM

HR222, I have several of these 367 Skil Saws, parts are very hard to find . Sears and Skil repair are no help , maybe buy another saw on Ebay for parts if you can find one .

Most parts from the model 77, the 7-1/4 inch saw will not work or fit , the 6-1/2 inch is a special saw with a lot of its own parts exclusive tot heat saw .

If you want to swap it for a model 77, i have some great saws available for a trade .

I gave a great tool repair man in LA CA, even he cannot seem to find some parts for these saws?

Attention Big Block yeti : the 6-1/2 inch diamond knockout blades are available from Freud and
also at most Home Depots believe it or not !

Good hunting guys !

-- [email protected]

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com