Skil 3410 Table saw

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Techo posted 02-19-2013 08:19 PM 4463 views 0 times favorited 2 replies Add to Favorites Watch
View Techo's profile


19 posts in 3040 days

02-19-2013 08:19 PM

I am looking for a Zero Clearance Insert for my table saw. Any ideas? Any compatible inserts that may be from different manufacturer?

2 replies so far

View Kaleb the Swede's profile

Kaleb the Swede

1984 posts in 3051 days

#1 posted 02-20-2013 03:20 AM

Hi there techo. I have a Skil saw table saw. They don’t make any zero clearances of any sort for this saw. If you want to have more control on the cuts I would suggest building sleds to suit whatever specific need that you have. There are many plans available for those. I remedied mine by (carefully) grinding the tabs out of the miter slots and created sleds for it. I also purchased the skil 80092 table saw stand which increases the rip capicity greatly and gives you a t square fence. That fence alone is worth the purchase. The thing only cost 40 bucks on amazon. I have seen it now for about 60 or so. Hope this helps

-- Just trying to build something beautiful

View lab7654's profile


266 posts in 3328 days

#2 posted 02-20-2013 03:38 AM

I agree with Kaleb. Sleds seem like the best thing for portables. Make a few of different sizes for different purposes, such as small parts, general crosscutting, and panels. I suppose you could try and make your own insert out of wood, but it seems like it would be a little difficult. People have done it, though. And to Kaleb, that table saw stand is the coolest accessory I’ve seen in a while, and it’s pretty affordable!

-- Tristin King -- When in doubt, sand it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics