LumberJocks

Replacing drive belt on Ryobi AP 10 Planer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by hoss1947 posted 02-12-2013 11:27 AM 10227 views 0 times favorited 19 replies Add to Favorites Watch
View hoss1947's profile

hoss1947

10 posts in 2852 days


02-12-2013 11:27 AM

Topic tags/keywords: ryobi ap 10 benchtop planer drive belt

I recently had to do this on my old AP10 planer, did a lot of searching and found little help. Except comments like “good luck”

So when I finally figured it out I wrote the procedure I used up and have a Acrobat pdf file of the procedure with photos and a copy of the AP 10 users manual. Will be happy to share ….just contact me and I will email it to you.. just email me at [email protected]comcast.net


19 replies so far

View IrreverentJack's profile

IrreverentJack

728 posts in 3765 days


#1 posted 02-12-2013 01:18 PM

Jim, I have almost unused AP10 and have managed to locate spares and a manual. I have never turned it on thinking I should clean out old grease and check the belt etc. . I’d really appreciate your instructions. Sending you an email. Thank you. -Jack

View AndrewStout's profile

AndrewStout

1 post in 2278 days


#2 posted 09-08-2014 03:10 PM

Jim, I have an AP10 as well. My drive belt just broke and I am getting ready to dig into the project. I would love a copy of the procedure if you don’t mind!

View JeffreyJacob's profile

JeffreyJacob

1 post in 2244 days


#3 posted 10-12-2014 08:50 PM

Jim, just blew the belt drive on my 10 Ryobi,...I ordered new drive belt and a set of new blades…can you help me out with how to change the belt drive?
Thanks,
Jeff

View hoss1947's profile

hoss1947

10 posts in 2852 days


#4 posted 10-12-2014 08:57 PM

Jeffrey Jacob, would be happy to sent it to you, it also includes a copy of the manual. PLEASE SEND THE REQUEST DIRECT TO ME as an email [email protected] …will send you the Acrobat PDF file.

View dan21's profile

dan21

1 post in 1989 days


#5 posted 06-24-2015 08:00 PM

Jim,

Please send me the AP 10 belt replacement instructions.

Thanks,
Dan

View hoss1947's profile

hoss1947

10 posts in 2852 days


#6 posted 06-24-2015 08:21 PM


Jim,
DAN21…....would be happy to sent it to you, it also includes a copy of the manual. PLEASE SEND THE REQUEST DIRECT TO ME as an email [email protected] ‚Ķwill send you the Acrobat PDF file.

Jim

Please send me the AP 10 belt replacement instructions.

Thanks,
Dan

- dan21


View bondogaposis's profile

bondogaposis

5898 posts in 3273 days


#7 posted 06-24-2015 10:01 PM

Sent email

-- Bondo Gaposis

View hoss1947's profile

hoss1947

10 posts in 2852 days


#8 posted 06-24-2015 10:21 PM

Bondo Gaposis it is on its way!

View frankiebeckman's profile

frankiebeckman

1 post in 1406 days


#9 posted 01-27-2017 08:25 PM

Just sent you and email

[email protected]

View wife2's profile

wife2

1 post in 1302 days


#10 posted 05-11-2017 04:03 PM

Hoss1947, thank you for the offer to send the pdf if needed. My husband definitely needs the pdf. I have sent you an email separately.

kind regards!

-- Jimmie the Greek's Wife

View hoss1947's profile

hoss1947

10 posts in 2852 days


#11 posted 05-15-2017 12:37 PM

Just an update, since I posted this I have responded to over 200 request from around the world – Korea, South Africa, England, Chile etc.

Hope it has helped.

Still available, just email me per original post.

View pev's profile

pev

1 post in 1943 days


#12 posted 08-08-2017 04:04 PM

I had to figure this out the hard way.

View hoss1947's profile

hoss1947

10 posts in 2852 days


#13 posted 12-27-2017 12:21 PM

Well 2017 update, I have now sent to about 300 people world wide. Big increase in requests in the past 6 or 7 months.

Still available just email me at:

[email protected]

View DaMuffinMan's profile

DaMuffinMan

5 posts in 1496 days


#14 posted 02-28-2018 03:33 PM

I know this post is a few years old, I tried emailing hoss and the email is no good. Does anybody have these instructions for changing the belt or can explain it to me. I have the machine apart and the belt off. Is there anything special that needs to be done?

View hoss1947's profile

hoss1947

10 posts in 2852 days


#15 posted 02-28-2018 07:56 PM


I know this post is a few years old, I tried emailing hoss and the email is no good. Does anybody have these instructions for changing the belt or can explain it to me. I have the machine apart and the belt off. Is there anything special that needs to be done?

- DaMuffinMan


Well 2017 update, I have now sent to about 300 people world wide. Big increase in requests in the past 6 or 7 months.

Still available just email me at:

[email protected] (note.net not .com)

- hoss1947


Well 2017 update, I have now sent to about 300 people world wide. Big increase in requests in the past 6 or 7 months.

Still available just email me at:

[email protected]

- hoss1947


showing 1 through 15 of 19 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com