Cabinet hinges for corner cabs

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by rut posted 12-20-2012 01:02 PM 1065 views 0 times favorited 1 reply Add to Favorites Watch
View rut's profile


70 posts in 2866 days

12-20-2012 01:02 PM

Has anyone installed hinges on a kitchen corner cabinet? I purchased these

and I’m not really sure how much space you would leave between the two door halves for the 90 degree hinge.

Any help would be appreciated.


1 reply so far

View Lee Barker's profile

Lee Barker

2172 posts in 3335 days

#1 posted 12-20-2012 04:37 PM

Hi Rut—

I can help you here. The two doors meet at next to zero. You don’t want them to touch, but the space needn’t be large.

We found that using the face frame plates on the second door (the first door being the one that’s hinged to the cabinet) was easier than using the plates that mount in system holes.

It’s pretty easy to dummy this up with 3/4 scrap. It doesn’t need to be much wider than 4 inches, one hinge, to see if it’s going to sit right and that you have enough adjustability.



-- " his brain, which is as dry as the remainder biscuit after a voyage, he hath strange places cramm'd with observation, the which he vents in mangled forms." --Shakespeare, "As You Like It"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics