All Items sold

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by offyguy posted 08-09-2012 07:16 PM 2738 views 0 times favorited 17 replies Add to Favorites Watch
View offyguy's profile


24 posts in 3205 days

08-09-2012 07:16 PM

I’m going back to school and need to sell some tools I don’t use.

1. Medium Quick release vise from Lee Valley. 9in jaw width, 13 opening, brand new never used never in stalled, still in original box. SOLD-SHIPPED 8/13/12

2. Lee Valley Veritas twin screw vise, this is the larger one capable of up to 24in between the screws. This is brand new in the box, never installed. New price is $239, I’d like $175 obo, buyer pays shipping. I don’t have a pic but I can get one if anyone wants to see.

3. Lee Valley Veritas 5 1/4 bench plane with A2 blade. Used very little. SOLD PENDING FUNDS.

4. Lie Nielsen 8ppi Cross cut panel saw. used very little. SOLD, SHIPPED 8/10/12.

5. Senco PC1010, 1 gallon tank, 1 horsepower air compressor. I used this compressor very little with an air powered engraving tool in my house. It’s in good shape and is a little quieter than other larger compressors. I think I paid $140 for it new and I’d like to get $75 or best offer. Buyer pays shipping. I can get photos if anyone is interested.

6. Lee Valley Veritas Side rabbet plane. Used very little if at all, still in original box. SOLD, SHIPPED 8/10/12.

7. Lee Valley Bevel Edge Chisels, 7 pc set in wood box. 1/4 to 1 1/2 width. 1/2, 3/4, 1 have been used the most but all are in good shape. . SOLD, SHIPPED 8/10/12

Thanks For looking at my stuff. Almost forgot, Paypal is preferred, but money orders are OK too, Thanks.


17 replies so far

View waho6o9's profile


8771 posts in 3090 days

#1 posted 08-09-2012 07:27 PM

PM sent for the chisel set.

View Mosquito's profile


9863 posts in 2806 days

#2 posted 08-09-2012 07:34 PM

likewise about the saw

-- Mos - Twin Cities, MN - -

View Gerald Thompson's profile

Gerald Thompson

1222 posts in 2748 days

#3 posted 08-09-2012 08:53 PM

PM sent on Side Rabbet plane.

-- Jerry

View MikeS's profile


92 posts in 4361 days

#4 posted 08-14-2012 01:35 PM

PM sent on the 5 1/4 Jack

View MikeS's profile


92 posts in 4361 days

#5 posted 08-14-2012 11:42 PM

John: Check your PM’s

View bigike's profile


4057 posts in 3802 days

#6 posted 09-05-2012 10:25 AM

Can u send a pic of the vise email at bottom?

-- Ike, Big Daddies Woodshop, http://[email protected]

View offyguy's profile


24 posts in 3205 days

#7 posted 09-05-2012 09:27 PM

Yep, I’ll get a pick of it, but it might take a day or so, because I don’t have a reliable internet connection yet, I’m using the WiFi at McDonalds right now!


View flyboy's profile


96 posts in 3789 days

#8 posted 09-06-2012 05:30 AM

Hi John. Is the Lee Valley twin screw vise still forward sale and can you sender me a pic. Thanks Flyboy

-- 160th S.O.A.R

View dubsaloon's profile


622 posts in 3307 days

#9 posted 10-10-2012 12:01 PM

So what do you have still for sale?

-- The works of evil people are not the problem. It is the "Good" people standing by and watching not speaking up. Dubsaloon

View offyguy's profile


24 posts in 3205 days

#10 posted 10-11-2012 11:03 AM

I’ve still got the veritas twin screw vise, and the senco air compressor for sale. Also, I found a DMT diamond stone , that I hardly use, so that is for sale too. I’ll post some pics of it later this evening.


View pdbernardo's profile


14 posts in 2844 days

#11 posted 10-13-2012 12:23 AM

Hey, I’m in for the Veritas vise. I’m pretty new here, and pretty new to woodworking, but I’ve been working on putting together a workbench, and that vise is the one I’ve had my eye on. Unfortunately, I can’t PM until I have 5 posts, so I’m not sure how to proceed.

-- --- Patrick.

View pdbernardo's profile


14 posts in 2844 days

#12 posted 10-13-2012 12:28 AM

Ok. This is post #5. Problem solved I guess. I owe you guys content. I promise I’ll post pics of the workbench when I’m done. It’ll be my first ‘real’ project. Let’s hope. The M&T joints have been much, much harder than I thought. And I’ve only started the base.

-- --- Patrick.

View offyguy's profile


24 posts in 3205 days

#13 posted 10-13-2012 02:13 PM

pdbernardo, Check your private messages.


View ayryq's profile


94 posts in 2705 days

#14 posted 10-14-2012 12:56 AM

What grit and size is the DMT?

View offyguy's profile


24 posts in 3205 days

#15 posted 10-15-2012 09:09 PM

ayryq, The diamond stone is the 8 inch size stone, which is approx 2 5/8” by 8.” The stone is 600x on one side and 1200x on the other (what DMT calls 600 and 1200 is not quite the same as what other manufacturers of other abrasives use). Think of this as a Fine and Extra Fine stone, which if you’re one of those people like me who sharpens your tools often, and only needs to touch up or maintain an edge, this stone works great. If you’re one of those people who beats their tools until the edge is completely missing, then you’re going to need something coarser, for rough shaping. Also, I have the plastic stand for it too. I bought both items from Lee Valley, maybe 3 years ago, still in great shape, lots of life left in it (it’s diamond after all). The two items were about $100 new. I’d like to get $60, and I’d pay the shipping if you’re interested.,43072


John DeBoom

showing 1 through 15 of 17 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics