i look forward to getting back in my wood shop

« back to Woodworking Trade & Swap forum

160 posts in 3481 days

02-28-2012 11:50 PM

Topic tags/keywords: cedar cherry walnut oak turning veneering finishing milling joining sanding woodburning rustic traditional

i just wonted to let everyone no that i look forward to getting back in my wood shop i had back surgery and my back still hurts it a slow recovery but i am thanking of all kind of project to do i i am going to do something to hoener r home town hero sgt alvin see york i not going let all the cats out of the bag but i thank you all well like i going to give it to his son to place at the park i hope in 4 to 6 week to get back at it and if any one wold like to talk wood i am on yahoo messenger it vance_154 i look forward to make lots of buddy i if any one need or wold like to trade wood i got a ton set back

5 replies so far

Dallas home \| projects \| blog 3599 posts in 3540 days #1 posted 02-29-2012 12:21 AM	Glad to hear that you are on the mend. Soon you’ll be up and at ‘em and out in the shop making piles of sawdust! In the meantime, just take it easy and get well! -- Improvise.... Adapt...... Overcome!
robert triplett home \| projects \| blog 1566 posts in 4157 days #2 posted 02-29-2012 01:54 AM	Take your time with your recovery. worse thing to do is hurry and make it worse. should I drive back there and take all of that wood out of your way so you aren’t tempted to lift it!!! If I ever drive from California to my brother’s place near Durham, NC, we might have to talk. -- Robert, so much inspiration here, and now time to work!!!
vman154 home \| projects \| blog 160 posts in 3481 days #3 posted 03-10-2012 03:13 AM	thank to all that wish me well
Greg, B. home \| projects \| blog 55 posts in 3356 days #4 posted 03-13-2012 09:07 PM	Glad everything is going well now Vance. Don’t try and do to much and mess up your recovery. I had back surgery when I was in high school and also had neck surgery last year after a ceiling fell on me. Good luck with everything!
vman154 home \| projects \| blog 160 posts in 3481 days #5 posted 03-17-2012 09:13 PM	will i may have to have a 2nd surgery i will find out wenday the 21

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	13246
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2831
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	579
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	417
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1914
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6402
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7944
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	32955
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	335
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6489
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1825
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7312
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1647
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2644
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1273
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5437
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2401
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9685

	Author	Latest activity	New comments or replies since you last checked
Practicing weave	dub560	04-14-2021 04:01 AM	sign in to get readership tracking
mounting drawers in small MDF cabinet	JoeFuture	04-14-2021 03:58 AM	sign in to get readership tracking
dongtravel's Profile	dongtravel	04-14-2021 03:41 AM	sign in to get readership tracking
Harvey Table Saws?	jrowe88	04-14-2021 03:39 AM	sign in to get readership tracking
Need Assistance With Sliding Compound Miter Saw - Small Planter Box	LGLDSR73	04-14-2021 03:31 AM	sign in to get readership tracking
Teach your wood to spell.	LittleBlackDuck	04-14-2021 03:29 AM	sign in to get readership tracking
Off-topic content. Click to see the post.	woodbutcherbynight	04-14-2021 03:29 AM	sign in to get readership tracking
Handplanes Of Your Dreams, v2.0 - Sharp As Ever	Bertha	04-14-2021 03:16 AM	sign in to get readership tracking
Drying time of logs	Brodan	04-14-2021 03:10 AM	sign in to get readership tracking
Chess table	Zipsss	04-14-2021 03:05 AM	sign in to get readership tracking

i look forward to getting back in my wood shop

5 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Practicing weave

mounting drawers in small MDF cabinet

dongtravel's Profile

Harvey Table Saws?

Need Assistance With Sliding Compound Miter Saw - Small Planter Box

Teach your wood to spell.

Off-topic content. Click to see the post.

Handplanes Of Your Dreams, v2.0 - Sharp As Ever

Drying time of logs

Chess table

i look forward to getting back in my wood shop

5 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...