Buffalo Band Saw Manual

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by harris13 posted 02-05-2012 05:26 AM 9887 views 0 times favorited 13 replies Add to Favorites Watch
View harris13's profile


16 posts in 3517 days

02-05-2012 05:26 AM

I have a14 inch Buffalo Band Saw BP-VBS-14 and I can’t find a manual for it. Please tell me where to find one. Thanks Harris

-- Harris, North Carolina

13 replies so far

View Scot's profile


344 posts in 4609 days

#1 posted 02-05-2012 05:38 AM

I had a buffalo band saw years ago and had the same problem. I finally found a downloadable copy on the internet. Since then I have seen a copies on ebay a couple of times.

-- If the old masters had power tools, they would have used them. So get off your damn High Horse.

View harris13's profile


16 posts in 3517 days

#2 posted 02-05-2012 03:57 PM

Scot, do you remember where you found it on the internet? Harris

-- Harris, North Carolina

View Don W's profile

Don W

20158 posts in 3780 days

#3 posted 02-05-2012 04:02 PM

try to match it with the same thing at harbor freight. Some of the General Machine products are the same. Try “GENERAL MACHINERY WOOD BANDSAW
14” W/DUST COLLECTOR models 32206/32208”

-- - Collecting is an investment in the past, and the future.

View mfm22's profile


2 posts in 3552 days

#4 posted 02-07-2012 09:30 PM


I have a manual of the Buffalo Bandsaw model no. BP-VBS-14 that came with mine when I bought it back in the 70’s. If any one needs a copy, I would be more than happy to copy & email to you. Just let me know and give me a day or two to get it out to you.
Email: [email protected]

View harris13's profile


16 posts in 3517 days

#5 posted 02-16-2012 10:54 PM

mfm22. Have you had any luck on downloading the manual? Please email me a copy if you can. my email is [email protected] Thanks again.

-- Harris, North Carolina

View Hooktj's profile


1 post in 3025 days

#6 posted 06-10-2013 01:29 AM

I recently just purchased a 1983 buffalo band saw. Looking for manual. Would you still copy and email to me?

View denise2017's profile


1 post in 1392 days

#7 posted 11-29-2017 04:21 AM

Can you please email me a copy of that manual. [email protected]

thank you

View Clouseau's profile


58 posts in 4246 days

#8 posted 03-18-2018 01:13 AM

If you still have an electronic copy, I would like one sent to [email protected]

-- Dan Coleman, retired Welding Inspector and past IA Teacher

View PastBlast's profile


1 post in 836 days

#9 posted 06-08-2019 01:58 AM

Hello Mfm22 – I know this is an old post – but is it still possible to get a BP-vbs-14 manual?

[email protected]

Thanks in advance for any assisitance!

-- Bruce - A positive attitude is half the battle. The other half? Good plumbing.

View HFDFireman's profile


1 post in 370 days

#10 posted 09-15-2020 12:24 PM

I realize this is a very old post but wanted to check and see if you happen to still have the digital copy of the manual? Thank you in advance! [email protected]

View Oldman55's profile


2 posts in 48 days

#11 posted 08-03-2021 07:44 PM

I would also like a copy of the manual if anyone has it.

[email protected]


View MrUnix's profile


8748 posts in 3412 days

#12 posted 08-03-2021 08:25 PM

IIRC, that is the exact same machine that was sold by Harbor Freight under the Central Machinery badge (Item #60564). If so, you can get a PDF of the manual here.


-- Brad in FL - In Dog I trust... everything else is questionable

View Oldman55's profile


2 posts in 48 days

#13 posted 08-03-2021 10:23 PM

Thanks Brad

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics