Woodfast PT310X upgrade to spiral cutter

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by TEK73 posted 05-20-2022 06:16 AM 276 views 0 times favorited 0 replies Add to Favorites Watch
View TEK73's profile


411 posts in 1201 days

05-20-2022 06:16 AM

Topic tags/keywords: spiral cutter woodfast pt310x


Yesterday I received and installed my new spiral cutter head for my Woodfast PT310X jointer/thicknesser.

It’s has 31cm cutting width capacity and a 3HP motor. Originally delivered with a 3 knives cutter head, that has delivered nice cut surfaces all the time, but recently the blade has became noticable duller – and something needed to be done. Wanting a spiral cutter head all along I figured that instead of sharpning the knives or buy new knives I would rather dig in and get a spiral cutter.

The spiral cutter was specified with a supplier from Aliexpress and arrived at my location (Norway) around one month later, both manefacturing and shipping.

There were som communication issues, but everything was sorted out and the received cutter was dead on the specifications.

There were one exception, the besrings should have been pre-mounted but was not, so a bit of struggel to get those on s they are press fit, but got it done.

I have done a few test cuts.
The cut is very nice, but I’ll have to adjust my outfeed table a bit higher as I’m currently getting some snipe.

I know that I may adjust it using set screws. However, it kindof looks like the outfeed table has the exact same lift mechanism as the infeed table, just that there of course is no handle and there seems to be some lock screws to prevent movement.

I’m wondering if that is an option as I want to just lift the whole table up, and not make any other adjustments…

This is where it seems to be possible to adjust!

-- It’s good to have an end to journey toward; but it is the journey that matters, in the end. - Ursula K. LeGuin

0 replies so far

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics