LumberJocks

SOLD - Complete Lathe package

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by DavidI posted 10-12-2021 11:40 PM 624 views 0 times favorited 6 replies Add to Favorites Watch
View DavidI's profile

DavidI

14 posts in 2636 days


10-12-2021 11:40 PM

Topic tags/keywords: lathe turning grinder jet rikon psi rockler wood river sorby nova spartan kodiak

SOLD

Everything except lathe is sold. Will be relisted. Lathe only for $750.

I am selling a complete wood turning package. Following is description of the various pieces. Very low usage and excellent condition. I’ll also throw in the 6ft bench it’s all sitting on. Asking $1400.

Everything is between one and max of 3yrs old. Very low usage and excellent condition. I never really focused on turning.

Jet Lathe package:

JET JWL-1221VS, 12”x21” Variable-Speed Woodworking Lathe
Lathe will accommodate a bed extension if desired.

Nova 48293 Pro-Tek G3 Chuck Bundle with 2’’, 4’’ and Pin Jaws, 1’‘x 8 TPI Direct Thread

Full-Size Ergonomic Carbide Turning Tool, Round

Full-Size Ergonomic Carbide Turning Tool, Square

Full-Size Ergonomic Carbide Turning Tool, Diamond

Wood River – ½” bowl gouge

Wood River – roughing gouge

Robert Sorby 1 inch Wide Rectangular Standard Skew Dual Bevel Chisel Overall Length 18 1/4 inches 810H

Robert Sorby 830H-1/8, 1/8” Wide Standard Parting Tool 13 ½” Overall Length HHS

Robert Sorby Deep Flute Bowl Gouge 1/2 inch HHS Extra Long Length Handle Overall Length 26 inches 842XLH-1/2

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2” 2MT)

Various pen turning kit items, blanks, sand paper, fine grit pads, and hardware.
A handful of other turning blanks.

RIKON Professional Power Tools, 80-805, Slow Speed Bench Grinder. Probably doesn’t even have 30 minutes of total running time on it.

I still have the other grinding wheel, original guards and such that were removed to accommodate the installed CBN wheel. Those have never been used.

Kodiak Sharpening System

Spartan CBN Wheel

Uvex face shield

A few things still not shown in the pics. I’ll also throw in the 6ft bench it’s all sitting on. Let me know if you want pics of anything specific.

I am in McKinney, TX (close to Dallas area)

-- David - from McKinney, TX


6 replies so far

View DavidI's profile

DavidI

14 posts in 2636 days


#1 posted 10-22-2021 01:57 AM

Bump

$1500 OBO

-- David - from McKinney, TX

View Knockonit's profile

Knockonit

1015 posts in 1484 days


#2 posted 10-22-2021 11:55 AM

if i missed it sorry, but what state, country ect. location might help
rj in az

-- Living the dream

View DavidI's profile

DavidI

14 posts in 2636 days


#3 posted 10-22-2021 02:40 PM

Apologies. Missed that.

McKinney, TX (close to Dallas area)

-- David - from McKinney, TX

View DavidI's profile

DavidI

14 posts in 2636 days


#4 posted 10-24-2021 05:05 PM

Bump – $1400

-- David - from McKinney, TX

View DavidI's profile

DavidI

14 posts in 2636 days


#5 posted 10-26-2021 08:34 PM

Sold all but the lathe. Will relist, but know that the lathe alone will be for sale. $800. It is less than 3yrs old and has very little time on it.

-- David - from McKinney, TX

View DavidI's profile

DavidI

14 posts in 2636 days


#6 posted 10-27-2021 01:09 AM

750

-- David - from McKinney, TX

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com