LumberJocks

Supermax problem solved!?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Robert posted 06-15-2021 03:56 PM 393 views 0 times favorited 2 replies Add to Favorites Watch
View Robert's profile

Robert

4643 posts in 2646 days


06-15-2021 03:56 PM

Posted a while back about issues with conveyor belt drift.

Upon closer examination, I discovered a gap between the support bracket and the roller bushing. I inserted a washer and the drift issue seems to be solved.

I know this has been an issue for some other people, maybe this is something to look at on your machine.

-- Everything is a prototype thats why its one of a kind!!


2 replies so far

View Bill_Steele's profile

Bill_Steele

771 posts in 2896 days


#1 posted 07-16-2021 02:34 PM

Thanks for posting this. I have always noticed that my conveyor belt seems to drift a tiny bit—I’ll check for the gap on my machine.

View Mosquito's profile

Mosquito

11229 posts in 3457 days


#2 posted 07-16-2021 04:57 PM

It took some tuning for me to get rid of the drift in mine too, but I just ran about 150 bdft through it recently with no discernable drift (not that much wood but a bunch of passes on each side of the pieces) . Glad you got yours figured out

-- Mos - Twin Cities, MN - http://www.youtube.com/MosquitoMods - http://www.TheModsquito.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com