LumberJocks

220v Remote Dust Collection - without remote

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by MJHaffeman posted 05-28-2021 06:44 PM 393 views 1 time favorited 4 replies Add to Favorites Watch
View MJHaffeman's profile

MJHaffeman

33 posts in 141 days


05-28-2021 06:44 PM

Topic tags/keywords: dust collector table saw remote

I have a Sawstop Professional 3hp and a shopfox w1666 2hp dust collector, both 220v. I have a 30A breaker which should handle both.
What I’m looking for is a switch that doesn’t require a manual remote control . I want to turn the saw on and automatically start the dust collector. There are plenty of 110 models available but I can’t find a 220 equivalent. It can’t be that hard.
We have the Jet model with remote at work it’s just inconvenient enough that it often goes unused.
Looking at the Ivac system but trying to avoid all the accessorizing. Just a simple, in-line setup.

Penn state gets close but I don’t want wires running across the shop, especially with tools on mobile bases. https://www.pennstateind.com/store/LRMSET220.html

This is what I need, but for 220: https://isocketproducts.com/#comparison-table

Alternately, I could build a voltage sensing switch if there are plans anywhere.

Any suggestions?

-- MJH


4 replies so far

View ibewjon's profile

ibewjon

2634 posts in 4030 days


#1 posted 05-28-2021 06:55 PM

If there is a magnetic starter on the dc, a current switch on the saw and a time delay relay so there is a short lag till the dc starts. I use this, I have my shaper, ts, jointer and planer set up with one. My dc starter is remote from my dc because the dc is permanent.
I get them from automation direct.

View toolie's profile

toolie

2210 posts in 3866 days


#2 posted 05-28-2021 07:58 PM

highly recommend IVAC. Not the least expensive but a solid product with solid customer support

https://www.ivacswitch.com/

-- there's a solution to every problem.......you just have to be willing to find it.

View MJHaffeman's profile

MJHaffeman

33 posts in 141 days


#3 posted 06-01-2021 05:55 PM

ibewjon, I like the current switch idea. Do you have any more details or pictures of how you’ve employed this solution? How it’s hooked up?

toolie, I like the Ivac and still might use it for more proximal applications.

-- MJH

View ibewjon's profile

ibewjon

2634 posts in 4030 days


#4 posted 06-01-2021 07:43 PM

I will get back to you soon with questions about your setup

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com