Dimensions of Delta 10" Contractor's Saw?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by thedog222 posted 04-13-2021 09:36 PM 371 views 0 times favorited 4 replies Add to Favorites Watch
View thedog222's profile


4 posts in 34 days

04-13-2021 09:36 PM

Topic tags/keywords: delta contractors saw

Hello all,
I’m thinking of picking up a Delta Contractor’s Saw (34-444) but only have a Camry to transport it. It doesn’t have a stand. If anyone has one and could give me the dimensions, I’d greatly appreciate it. It’ll save me a 2.5 hr round trip for nothing.
By the way, $125 with a Unifence seems like a pretty good deal to me, what do you all think?

4 replies so far

View MrUnix's profile


8559 posts in 3280 days

#1 posted 04-13-2021 10:40 PM

For the 34-440, which is basically the same machine, the catalog lists it as:

Width: 45”
Depth: 39 3/4”
Height: 18”

I imagine that width is including the extension wings and fence, so can be reduced further. Probably the same with depth, as you can remove the motor hanging off the back for transport. And it doesn’t have the stand, so you don’t have to worry about that either. I don’t think you would have much problem getting it as it’s not really all that big. And yes, $125 is a pretty good deal. The Unifence alone is worth it!


-- Brad in FL - In Dog I trust... everything else is questionable

View SMP's profile


3975 posts in 987 days

#2 posted 04-13-2021 11:01 PM

Worst case, you can take the extension wings off, and even the cast iron top off. I fit a Contractor 2 in the trunk of a 1996 Camry (back when the car was new ). Just bring some wrenches with you.

View thedog222's profile


4 posts in 34 days

#3 posted 04-14-2021 08:43 AM

Thanks to both of you.
I’ve learned that the Unifence is missing one rail- not looking like such a good deal now, since it looks like replacement parts are hard to find.

View xedos's profile


285 posts in 382 days

#4 posted 04-14-2021 11:00 PM

There is only one rail for a unifence !

You’ll need penetrating fluid and channel locks as well.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics