Delta 36-725T2 motor/brake noise or ????

« back to Power Tools, Hardware and Accessories forum

309 posts in 269 days

12-04-2020 08:43 PM

My Delta saw runs and cuts fine. When I shut off my Delta 36-725T2, as it is slowing down it has appx a 1/2 second noise before stopping, sort of like a brake moan. This saw does have a brake but it has never made noise until the last few days. Someone had a similar problem and I searched the forums but can’t find it. Anyone have this problem ? Any ideas?

3 replies so far

MrUnix home \| projects \| blog 8360 posts in 3173 days #1 posted 12-04-2020 09:34 PM	AFAIK, that saw does not have any breaking system… where did you get that info? What you are hearing is most likely the centrifugal switch snapping back, which is very common. Cheers, Brad -- Brad in FL - In Dog I trust... everything else is questionable
OldBull home \| projects \| blog 309 posts in 269 days #2 posted 12-04-2020 10:14 PM	Brake pads are listed in the parts diagram at the rear of the motor, item # 57 and also I recieved an email a few minutes ago and the tech from delta said it does have a brake, but the noise shouldn’t be problem if it occurs slowing down.
MrUnix home \| projects \| blog 8360 posts in 3173 days #3 posted 12-04-2020 10:47 PM	Interesting to know… apparently they changed out the motor between the original 36-725 and the newer ‘T2’ model. They do mention the new motor in the official Delta video showing the new features, but don’t mention any kind of brake on the motor (and the original machine didn’t have one). Delta 36-725T2 Table Saw - New Features by Delta Machinery It’s also good to see that Delta support was responsive to your query – that is a good sign ;) Cheers, Brad PS: Even a search for the word ‘brake’ in the users manual returns zero results! -- Brad in FL - In Dog I trust... everything else is questionable

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	13140
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2783
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	564
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	413
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1870
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	6303
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7858
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	32540
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	325
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	6421
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1784
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	7245
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1613
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2615
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1267
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	5394
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2394
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9626

	Author	Latest activity	New comments or replies since you last checked
Can anyone tell me for CERTAIN if this is possible?	spindeepster	01-25-2021 08:59 AM	sign in to get readership tracking
Nosakcin's Profile	Nosakcin	01-25-2021 08:55 AM	sign in to get readership tracking
Thoughts on new band saw	dfox52	01-25-2021 08:54 AM	sign in to get readership tracking
Bosch 1617EVS router with lift built into fixed base - thoughts?	JimLS	01-25-2021 08:45 AM	sign in to get readership tracking
Ktooman's Profile	Ktooman	01-25-2021 08:42 AM	sign in to get readership tracking
Eighteenth Century Cabinet #2: Some Pics of the Back, Legs and First Shelf	shipwright	01-25-2021 08:41 AM	sign in to get readership tracking
SUV 4x4 #15: Wheels	Dutchy	01-25-2021 08:36 AM	sign in to get readership tracking
SUV 4x4 #5: Fenders	Dutchy	01-25-2021 08:33 AM	sign in to get readership tracking
Mid century modern coffee table	BOBAH	01-25-2021 08:28 AM	sign in to get readership tracking
Thin RIP Jig	ugoboy	01-25-2021 08:21 AM	sign in to get readership tracking

Delta 36-725T2 motor/brake noise or ????

3 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...