LumberJocks

Sanding Sealer and Paint

  • Advertise with us

« back to Finishing forum

Forum topic by Ragis10 posted 12-04-2020 05:17 PM 279 views 0 times favorited 1 reply Add to Favorites Watch
View Ragis10's profile

Ragis10

3 posts in 157 days


12-04-2020 05:17 PM

Topic tags/keywords: finishing painting question

I am in home stretch of finishing my tablesaw table/outfeed table and I wanted to paint it a matte black afterwards. The top is made 3/4” Sanded Pine Plywood. I have noticed when I sanded it down that there are a ton of cracks throughout the piece. I know this is normal but I did some research on how to fill these voids, the best solution that I found was a brush on Sanding Sealer.

I have seen that you can use it as a base coat for poly finishes or any other finishes, but I want to use a spray on Krylon Matte Black paint.

Any tips, tricks, do’s or don’ts would be much appreciated, Thanks!


1 reply so far

View LesB's profile

LesB

2878 posts in 4458 days


#1 posted 12-05-2020 12:31 AM

I think the solution you have found it about the best you can do….except

I put a layer of tempered masonite on mine, just fastened with 18 gauge finishing nails (pre-drill the masonite). That way when it starts looking beat up I can easily replace it.

Another idea would to be to put a layer of formica on it (black of course).

-- Les B, Oregon

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com