Q about Incra Miter Express

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by HarveyDunn posted 11-25-2020 02:44 PM 363 views 0 times favorited 3 replies Add to Favorites Watch
View HarveyDunn's profile


417 posts in 2700 days

11-25-2020 02:44 PM

Anyone using the Incra Miter Express sled? I know they sell replacement panels for the kerf side. If I buy one sled and one replacement panel, can I set the latter up for cuts with the blade angled at 45 degrees and then swap that panel in and out with the 90 degree one?

3 replies so far

View Peteybadboy's profile


2838 posts in 2919 days

#1 posted 11-25-2020 07:55 PM

I would think not. I have the 5000 and 1000hd on sleds. Also which way does you saw tilt? Either way the sled would be week at the kerf with a 45 deg. cut. I build a 45 deg sled dedicated for that purpose.

-- Petey

View hairy's profile


3191 posts in 4501 days

#2 posted 11-25-2020 10:12 PM

I have the miter express with the 1000HD. I use a shop made sled for 45 degrees.

I would ask Incra that question.

-- You can lead a horse to water, but you can't tie his shoes. Blaze Foley

View Smirak's profile


109 posts in 1487 days

#3 posted 11-27-2020 04:06 PM

I believe you would have to replace “both pieces” when you wanted to cut 45s. The piece that actually attaches to the sled and the drop panel. Now I believe that both pieces are “made” when setting up your sled the first time (it’s been a few years). I think it would be productivity prohibitive to switch out both each time. As others have said, just make a dedicated 45 sled…

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics