TABLE SAW SLED! What am I doing wrong!!??

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by stevejack posted 09-29-2020 04:41 PM 607 views 0 times favorited 11 replies Add to Favorites Watch
View stevejack's profile


183 posts in 203 days

09-29-2020 04:41 PM

11 replies so far

View hairy's profile


3121 posts in 4415 days

#1 posted 09-29-2020 04:51 PM

It’s installed backwards

-- Genghis Khan and his brother Don, couldn't keep on keeping on...

View Ranmanb's profile


1 post in 26 days

#2 posted 09-29-2020 05:05 PM

And it’s upside down.

-- Randy

View Madmark2's profile


1714 posts in 1471 days

#3 posted 09-29-2020 05:24 PM


-- The hump with the stump and the pump!

View GR8HUNTER's profile


7919 posts in 1595 days

#4 posted 09-29-2020 06:29 PM

NO SNOW :<))))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View BurlyBob's profile


7946 posts in 3148 days

#5 posted 09-29-2020 08:01 PM

Shouldn’t the runners be on the bottom in the miter slots?

View Craftsman on the lake's profile

Craftsman on the lake

3524 posts in 4320 days

#6 posted 09-29-2020 08:47 PM

It’s a much older model. They were okay but can’t hold a candle to newer, more modern units. You might try waxing the slides and just live with it. If not, chock it up to a purchasing mistake and move on. I hope you didn’t pay too much for it.
Try putting it on Craigslist. Tons of suckers on there will pay big bucks for something like this. I should know. I just sold a plane to a guy…. secret is, the thing won’t get off the ground… his loss.

-- The smell of wood, coffee in the cup, the wife let's me do my thing, the lake is peaceful.

View fivecodys's profile


1660 posts in 2519 days

#7 posted 09-29-2020 10:45 PM

You didn’t use the five -cut method!

-- A bad day woodworking is still better than a good day working.

View northwoodsman's profile


387 posts in 4629 days

#8 posted 09-29-2020 10:48 PM

No dust on the floor, not enough clutter. You need to move your saw out of the kitchen and out into the shop.

-- NorthWoodsMan

View therealSteveN's profile


6454 posts in 1457 days

#9 posted 10-01-2020 04:16 AM

Good one.

-- Think safe, be safe

View SMP's profile


2664 posts in 788 days

#10 posted 10-01-2020 05:18 AM


View stevejack's profile


183 posts in 203 days

#11 posted 10-01-2020 11:07 AM

LOL! Well done!



Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics