LumberJocks

Legacy Ornamental Mill 1500 for sale

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by gcheris posted 06-02-2020 08:39 PM 1036 views 1 time favorited 15 replies Add to Favorites Watch
View gcheris's profile

gcheris

3 posts in 124 days


06-02-2020 08:39 PM

Topic tags/keywords: lathe spiral bevel turning router table pens dovetail mortise tenon

Legacy ornamental woodworking mill, model 1500, Standard, 2x and 1/4 gear sets, hand crank plus variable speed power drive and limit switches, router table, 11” diameter by 72” length capacity, tilts on both ends of the bed.

Projects others have done https://www.lumberjocks.com/projects/tag/legacy+ornamental+mill

Turning Pens https://www.youtube.com/watch?v=hoQ-nuDipUo
Demo Video https://www.youtube.com/watch?v=bpDJNYqCrEU

Photos at https://www.dropbox.com/sh/yoa7e4bjcwfao64/AADd40ZHtZKEl4hwj8f_l7EAa?dl=0

$500.00

Photos on request.


15 replies so far

View Dan Krager's profile

Dan Krager

4676 posts in 3082 days


#1 posted 06-09-2020 01:50 AM

Good photos of the machine you are selling are a must for remote sales. Location is helpful, too. So, pending these items, I’m interested.

DanK

-- Dan Krager, Olney IL http://www.kragerwoodworking.weebly.com All my life I've wanted to be someone. I see now I should have been more specific.

View Dark_Lightning's profile

Dark_Lightning

4188 posts in 3957 days


#2 posted 06-09-2020 01:55 AM

That’s a killer price. I sold my 900 model awhile back for a ton less. But it had no motors, limit switches, or rotary table. Does it come with any software? Not that I’m interested, but maybe the interested parties would want to know.

-- Steven.......Random Orbital Nailer

View gcheris's profile

gcheris

3 posts in 124 days


#3 posted 06-11-2020 04:52 AM

Hi guys,
Sorry I didn’t get any photos out, just ran out of time. On the road now until the end of June and will definitely get some photos out then. Again sorry for being so behind.

View Willoh's profile

Willoh

1 post in 102 days


#4 posted 06-11-2020 03:34 PM

Depending on location and condition, I’m interested.

-- Bill, Maryland

View gcheris's profile

gcheris

3 posts in 124 days


#5 posted 06-12-2020 01:37 AM

Mill is located in 95663

View Dark_Lightning's profile

Dark_Lightning

4188 posts in 3957 days


#6 posted 06-13-2020 01:45 AM



Mill is located in 95663

- gcheris

That’s pretty much all the way across the continent, but I will say that when I sold mine (900) it went to the east coast from California. I think that you have a pretty good setup- mine was all manual. Of course, it was a lot less money. Had I seen this when I bought mine, I may have made a different decision- I was in no mood to be running hand cranks for days on end…

-- Steven.......Random Orbital Nailer

View becikeja's profile

becikeja

1131 posts in 3661 days


#7 posted 06-13-2020 12:22 PM

That thing is pretty slick….. good luck

-- Don't outsmart your common sense

View daingram's profile

daingram

9 posts in 143 days


#8 posted 06-28-2020 01:47 PM

Hello again,
I have seen the pictures of the machine and don’t need to see anymore. I want the machine and no haggling.
If you will call me we will conclude the deal and arrange payment and shipping details.
Please call me.
Thank you

-- DaIngram

View shampeon's profile

shampeon

2167 posts in 3031 days


#9 posted 06-28-2020 08:09 PM

Here’s a wild thought: have you tried contacting the OP directly via PM? Might be worth a shot….

-- ian | "You can't stop what's coming. It ain't all waiting on you. That's vanity."

View daingram's profile

daingram

9 posts in 143 days


#10 posted 06-29-2020 01:15 PM

It was worth a shot. Thanks shampeon got a response.

-- DaIngram

View HokieKen's profile (online now)

HokieKen

15045 posts in 1986 days


#11 posted 06-29-2020 06:03 PM

If I were you, daingram, I’d probably send a message to Cricket (site admin) and ask her to remove that post with your phone number. Just a PSA.

-- Kenny, SW VA, Go Hokies!!!

View daingram's profile

daingram

9 posts in 143 days


#12 posted 06-29-2020 10:02 PM

Thanks for the advise. Sorry but how do I send a message to Cricket? New to the site so forgive the stupidity.
Thanks Kenny. I went down to the Contact Us tab and sent a message that way. Don’t know if that was correct or not.

-- DaIngram

View Cricket's profile

Cricket

2765 posts in 2440 days


#13 posted 06-30-2020 12:42 AM

I removed it. Let me know if there are more.

-- LumberJocks.com Community Manager

View daingram's profile

daingram

9 posts in 143 days


#14 posted 08-13-2020 05:45 PM

Would anyone or know of anyone who might be interested in a LOM drive motor and all the accessories?
I’ll list everything below:
1. 90 VDC Dayton 4Z131B
2. Motor to frame mounting plate and screws
3. Motor to drive lead screw connector
4. Motor control box (ON/OFF, Forward/Reverse, Speed Control) standard LOM equipment
5. Junction box and Limit switch
6. This comes all prewired. Mount everything, plug in the motor, plug to 110v and away you go.
I will post some pics later. I am thing $400.00 plus shipping would be fair. What are your thoughts.
Reason for selling: had to buy a complete machine to get what I wanted for my 1200.
Thanks
DaIngram

-- DaIngram

View Dark_Lightning's profile

Dark_Lightning

4188 posts in 3957 days


#15 posted 08-14-2020 12:54 AM



Would anyone or know of anyone who might be interested in a LOM drive motor and all the accessories?
I ll list everything below:
1. 90 VDC Dayton 4Z131B
2. Motor to frame mounting plate and screws
3. Motor to drive lead screw connector
4. Motor control box (ON/OFF, Forward/Reverse, Speed Control) standard LOM equipment
5. Junction box and Limit switch
6. This comes all prewired. Mount everything, plug in the motor, plug to 110v and away you go.
I will post some pics later. I am thing $400.00 plus shipping would be fair. What are your thoughts.
Reason for selling: had to buy a complete machine to get what I wanted for my 1200.
Thanks
DaIngram

- daingram


You should think about starting a new thread, so that people downstream don’t get confused by your offer. I’m not the administration, just a friendly suggestion.

-- Steven.......Random Orbital Nailer

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com