LumberJocks

Broken Dw735x with a Shelix head

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Southsider posted 05-22-2020 09:52 PM 381 views 0 times favorited 5 replies Add to Favorites Watch
View Southsider's profile

Southsider

17 posts in 1060 days


05-22-2020 09:52 PM

Topic tags/keywords: planer shelix jointer dewalt 735 thicknesser

https://www.facebook.com/marketplace/item/555545798700246/

Found this 735x with a shelix head for $350 but guy says it won’t start up. Worth the buy??


5 replies so far

View Walker's profile

Walker

385 posts in 1281 days


#1 posted 05-22-2020 11:05 PM

Well, the shelix head new seems to be about $450. And the mobile stand around $150. That could be a great deal if you can figure out what’s wrong with it. Could still be an okay deal if you also find a working 735 that could use the stand and shelix head.

-- ~Walker

View johnstoneb's profile

johnstoneb

3147 posts in 2981 days


#2 posted 05-23-2020 12:10 AM

/there is a circuit breaker near the switch that could need reset. and there is one or two interlock switches to make sure the cutterhead cover and other covers are in place before it will start also. it could possible something thatg simple keeping it from running.

-- Bruce, Boise, ID

View Southsider's profile

Southsider

17 posts in 1060 days


#3 posted 05-23-2020 03:34 AM

So he said he would take $300 but believes it may be the armature that needs replacement. With the stand and shelix head, plus original cutter head, is this worth it? Thanks!

View pottz's profile

pottz

10385 posts in 1793 days


#4 posted 05-23-2020 03:37 AM

buy it,you got nothing to lose except a good deal.worst case you scrap the planer and still have a cutter head and stand.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View controlfreak's profile

controlfreak

960 posts in 410 days


#5 posted 05-23-2020 11:40 AM

Seems like I remember a YouTube video where someone had to bypass a one of the safety interlock switches to make sure the top cover is on. He was like I would never run it with this off but I should probably get it replaced later anyway. I think there may be three of these switches. I say grab it and see whats up with it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com