LumberJocks Woodworking Forum banner

Over arm blade dust hood

511 views 3 replies 2 participants last post by  Dave_0911 
#1 · (Edited by Moderator)
I was wanting a dust hood for my table saw that didn't cost an arm and a leg and I wanted minimum 3" dust hose connection, not the standard 2 or 2 1/2" right off the blade guard. Just thought I would share what I did to solve the dust problem off the blade. I can slide the complete assembly to the side for ripping narrow stripes, and completely remove for using jigs

Table Wood Interior design Tool Gas


Automotive tire Wood Cylinder Bumper Gas
 

Attachments

See less See more
4
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top