LumberJocks

Kreg ACS Dust Collection Adapter?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Brian Talbert posted 01-05-2020 12:50 AM 1410 views 0 times favorited 1 reply Add to Favorites Watch
View Brian Talbert's profile

Brian Talbert

38 posts in 1147 days


01-05-2020 12:50 AM

Anyone using the Kreg ACS plunge saw connected to your vac? What have you used to adapt the dust port to the hose?

-- www.instagram.com/w.brian.talbert/


1 reply so far

View Lazyman's profile

Lazyman

6970 posts in 2464 days


#1 posted 01-10-2020 11:59 AM

I don’t have that saw but you might check to see if the Rockler Flexi-port adapters might work. It is on sale right now. You might also have to purchase the expansion pack if one of the included adapters doesn’t fit. The fittings are a flexible rubber so that they can stretch a little or even fit a non round dust port in some cases. I would probably call them and ask them if they know whether one of their adapters fits.

The hose is a little on the heavy side IMO but it works for my odd sized sanders.

EDIT: I just looked at the manual. Below are the dimensions that I think you need to fit.
From the manual:
Dust Collection
(1) Align the large lug on dust bag with the large slot on the dust port, push on the dust bag and twist to lock. The 1.575” (40mm) outside diameter, 1.378” (35mm)
inside diameter dust port also accepts a
vacuum hose.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com