LumberJocks

Easy way to connect 4" pipe to Super Dust Deputy

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by DylanC posted 12-05-2019 04:23 AM 249 views 1 time favorited 2 replies Add to Favorites Watch
View DylanC's profile

DylanC

206 posts in 3285 days


12-05-2019 04:23 AM

Topic tags/keywords: super dust deputy sdr 35 fernco dust collection

I am in the process of building a small 2 stage system using 4” SDR and a Super Dust Deputy. I found that a Fernco 1059-44 works perfectly to fit a 4” SDR fitting to the 5” SDD inlet. Fits like a glove.

I’ve read a lot of posts full of people who have had trouble figuring out ways to adapt the 5-inch super Dust Deputy port to a more common in 6 inch or 4 inch duct. For me, using 4 in SDR pipe, this was a perfect solution.

As you can also see from the photo, A 6-inch fitting fits the discharge port pretty well. It was a bit loose at first, but a few wraps of duct tape fixed that.

-- Dylan C ...Seems like all ever I make is sawdust...


2 replies so far

View DaveInGA's profile

DaveInGA

22 posts in 766 days


#1 posted 12-05-2019 11:43 AM

Thank you for posting that. I’ve got a Dust Deputy I’m about to set up in the garage for my son in law to use and I’d been looking for a solution.

-- Dave back into woodworking in Jefferson, GA

View fivecodys's profile

fivecodys

1562 posts in 2247 days


#2 posted 12-05-2019 11:24 PM

That is exactly what I did too.

I wrapped the SDD side with tape to make sure I didn’t have any leaks.

-- A bad day woodworking is still better than a good day working.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com